frozen icee slush machine electric smoothies granita maker automatic snow melt mixer

Konmax Slush Machine Description:

The working principle of a snow-melting machine (or snow slush machine) can be explained in technical English as follows:

Core Mechanism
1. Refrigeration Cycle System
- Utilizes a compressor to circulate refrigerant (e.g., R134a) through a closed loop, absorbing heat from the mixture inside the tank. The evaporator coil rapidly cools the liquid to a semi-frozen state, achieving temperatures as low as -15°C .

2. Mixing & Agitation
- Equipped with a rotating blade or auger system driven by an electric motor (typically 200-500W). This component continuously stirs the liquid (e.g., juice, milk, or syrup) to prevent ice crystal formation, creating a uniform slush texture .

3. Temperature Control
- An electronic thermostat monitors and adjusts the cooling intensity based on pre-set parameters, ensuring optimal consistency without over-freezing .

4. Material Interaction
- Liquid ingredients are poured into a stainless-steel or polycarbonate tank. During operation, the combined action of chilling and mechanical shearing breaks down the mixture into fine ice particles, resulting in a snow-like texture .

Key Components
- Compressor: Provides the primary cooling power (e.g., hermetic reciprocating type).
- Evaporator: Copper or aluminum coils for efficient heat exchange.
- Agitator: Corrosion-resistant blades for homogeneous mixing.
- Control Panel: Allows adjustment of hardness, temperature, and cycle duration .

This process is widely used in beverage preparation for creating slushies, frappés, and frozen desserts, with commercial variants achieving production capacities up to 15L/hour .

Note:Sugar is essential when you use the drink machine and do not just use water during the procedure. The sugar content should not be less than 13% with sucrose and less than 22% with maltose. Meanwhile, after receiving the machine, you'd better use it 24 hours later.

Konmax Slush Machine Specification:

Konmax Slush Machine Detailed Photo:

The inside of the evaporator is made of 304 grade stainless steel, and the inside is made of pure copper and copper pipes. The cooling speed is fast. The snow melting time only needs 30 minutes, which saves time and is more efficient.

Humanized handle design
According to the ergonomic design, after a lot of investigation and rectification, the handle is more scientific and durable, and the spring is used to return to the position, which is easier and more convenient to use.

Independent temperature control switch
The multi-cylinder machine adopts an independent temperature control switch, which can independently control the refrigeration of each single cylinder, match the work of the cylinder according to the sales force, and design with different tastes to reduce loss.

For slushy machine 12 liter 2 tanks instruction manual please check :

How to use - SLUSH MACHINE.pdf