Black Rubber Ring For Pvc Pipe Waterproof Material Water Resistance

We usually use pvc pipe to transport water. But if only pvc pipe , the water will leek at the joint, so we need to fit rubber ring for sealing. Then the leakage will be solved.

Rubber ring is very small accessory in a water conveyance system, but it plays a very important part.

Advantages of Our Ring Seal:

1, Wide range of dimensions:

a) Standard, including AS 568, BS 1806, French, JIS B 2401-P / G / V / S series

b) Nonstandard, we also have thousands of molds besides standard sizes.

Total o ring molds, more than 4000. ID(0.5mm~1500mm), CS(0.3mm~23mm)

2, Wide range of colors:

Black, white, blue, yellow, red, green, we can also adjust colors by color number (Pantone).

3, Wide range of materials:

NBR(Nitrile Rubber/Buna-N), SIL(Silicone Rubber), EPDM(Ethylene propylene Rubber),

FKM(fluoroelastomer FKM/FPM), HNBR (Hydrogenate Nitrile), CR/Neoprene/Polychloroprene,

SBR(Styrene Butadiene Copolyme), IIR(Butyl Rubber), PU (polyurethane rubber),

FLS (Fluorinated Silicone Rubber), FFPM(FFKM).

4, All kinds of certificats:

ISO9001, TS16949, FDA, RoHs, Reach and so on.

Basic info.:

Rubber ring for pvc pipe can be different shapes, now we introduce the simplest one, o-ring.

Drawing of o ring:

The choice of material:

We usually use NBR, EPDM or Silicone for pipe sealing, but how can we choose which to use ? You can see the differnces of these materials and then choose one from the operating condition.

Quality Control:

We will control the quality while production, every two hours, our inspection personnel are regular inspection of the products. After the rubber rings be made , we have to inspect them, and before package, final inspection will be arranged.

All inspection by machine:

Products Show:

Name: Rubber ring for PVC pipe, Color: Black, Function: Waterproof

FAQ:

1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$