Auto Chipboard Production Line Osb Making Machine MDF Machine

Particle board is to use footpaths timber, branch wood, bagasse, bamboo, wood processing waste, sawdust and other wood as raw material, Urea-formaldehyde resin adhesive imposed after mixing, through HP repression into density at 680-800kg/cubic meters of man-made sheet. Face plate for the graded structure, smooth surface, good processing performance, widely used for furniture, construction, packaging, vehicles and ship’s interior decoration. As particle board with abundant sources of raw materials, product wide range of uses, noise effects and anti-borers, good performance advantages. Therefor, the product has broad market prospects. Our factory has successfully developed the particle board production line with an annual capacity of 10000-100000 cubic meters. Equipped with PLC control system with man-machine interface of famous foreign brand names, the production line is easy to operate, stable to run, which makes production cost greatly reduced. With small investment in fixed assets, it is the optimum choice for the manufacturers of particle board.

Properties
Over time, the term MDF has become a generic name for any dry process fibre board. MDF is typically made up of 82% wood fibre, 9% urea-formaldehyde resin glue, 8% water and 1% paraffin wax and the density is typically between 500 kg/m3 (31 lb/ft3) and 1,000 kg/m3 (62 lb/ft3) The range of density and classification as light, standard, or high density board is a misnomer and confusing. The density of the board, when evaluated in relation to the density of the fibre that goes into making the panel, is important. A thick MDF panel at a density of 700–720 kg/m3 may be considered as high density in the case of softwood fibre panels, whereas a panel of the same density made of hard wood fibres is not regarded as so. The evolution of the various types of MDF has been driven by differing need for specific applications.

If you are interested, do not hesitate to contact me.