16:9 Golden 4K 8K Indoor Video Wall 500W/M2 1000nits Small LED Display Board P1.25
4K 8K P1.25 LED Video Wall Featrues:
item | P1.25 4K 8K P1.25 LED Video Wall |
Color | Full-color real pixels |
Use environment | Indoor |
Pixel pitch | 1.25mm |
Module size | 200*150mm |
Physical density | 640000 dots/㎡ |
Pixel configuration | 1R1G1B |
LED chip | SMD1010 |
Module resolution | 160*120 |
Module power | 20w |
Recommended viewing distance | >1.2m |
Best viewing angle | H: 160°; V:160° |
Maximum power consumption | 700w |
Cabinet size | W400m×H300mm |
Standard cabinet resolution | 320*240 |
Driving method | 1/30 Scan, Constant Current |
Video frame rate | ≥60 Hz |
Rate refresh | ≥3840Hz |
White balance brightness | ≥700cd |
Operating temperature/Humidity | -40℃~+60℃ |
Ingress protection | IP43 |
Input voltage | 110-220V AC±10% |
Gray scale /Color | Display Colors ≥16.7M(Synchronize) |
Brightness control | Manual/Automatic |
Input signal | RF,S-VIDEO,RGBHV,YUV,YC & COMPOSITION,etc |
Control system | PCTV+DVI video card+control card+fiber |
MBTF | >5000 hours |
Life Time | >100,000 Hours |
The rate | <0.0001 |
After-sale service of 4K 8K P1.25 LED Video Wall
1.Do you provide onsite assistance?
Yes, our trained professional is available during your event to install, dismantle and support.
2: How is the switching sequence of LED display screen?
1) screen switching sequence: on, first turn on the computer, then screen; off, first shut off screen, then computer. 2) Interval of switching LED display must be greater than 1 minute.
3: How is the ambient temperature of LED display screen?
When ambient temperature is too high or cooling condition is bad, users had better not to turn on the screen for a long time. Screen shall be installed in temperature from-10°C to 40°C. Over environment temperature range, temperature control equipment must be installed. It is forbidden to install LED display near any heat source.