Indoor Led Video Wall P2.5 Advertising Rubik'S Cube Various Specifications With Magnets

Indoor Led Video Wall Features:
Delicated image, wide horizon viewing angle at 140 degree to provide better viewing experience with optimal refresh rate (2000Hz), high grey level (14 bits) and high contrast ratio (2000:1);
P3 indoor SMD2121 led screen;
Good hot dissipation, without fans, no noise, beautiful looking, easy mounting without gap;
Excellent heat dissipation and noiselessness with ultra-quite fan;
Wide view angle and shot view distance, no stroble,friendly to our eyes;
Ideal parameter setting,effectively slowing down the speed of brightness and color reduction;
It features wide viewing angles, so real and beautiful colors will be shown from all directions;

Indoor Led Video Wall FAQ:

Q1: How is the switching sequence of LED display screen?

1) screen switching sequence: on, first turn on the computer, then screen; off, first shut off screen, then computer. 2) Interval of switching LED display must be greater than 1 minute.

Q2: How is the ambient temperature of LED display screen?

When ambient temperature is too high or cooling condition is bad, users had better not to turn on the screen for a long time. Screen shall be installed in temperature from-10°C to 40°C. Over environment temperature range, temperature control equipment must be installed. It is forbidden to install LED display near any heat source.

Q3: How is the ambient humidity of LED display screen?

When installing screen, ambient relative humidity should be in the range from 30% to 70%. It is prone to get static electricity when the indoor humidity is below 30%; When the indoor humidity is higher than 70%, electronic components are easy to get damp.