Shenzhen Riyueguanghua Green energy led street new products 120w led street lamp solar lighting with remote control

Product description:

Our integrated solar street light which integrates the green-energy parts Solar panel, LED
lamp and the Lithium battery into a single product, with intelligence induction system to gain
the solution of low-energy, long-time, high-luminance and free maintenance. At the same time,
it’s convenient in the shipment and installation.

PAD series put high efficiency mono solar panel,intelligent MPPT charge controller,deep cycle long life LifePO4 battery,high
lumen led bridgelux 3030 led chip all in one box,easy to install and transportation

This solar led street light with Aluminum + Steel glass materials. The solar led street light working time can be 12 Cloudy/Rainy days.

But the charging time for the solar led street lighting only need 6 hours under strong sunlight is okay.

We use Bridgelux LED of this solar led street light and the lumen can arrives 170LM/W.

The mainly Functions of this PAD series solar led street lighting is Human Body Infrared Sensor Control,time control,light control, smart remote control.

Data sheet:

User-friendly design, easy to assemble and disassemble:

PAD series is integrated design,lamp body without glue.Compared with any other design light which Non-removable
replacement product,PAD design all in one solar lights each parts very easy to maintain and replacement.cut cost also.All
the connector have label,all cables use waterproof male and female plug connectors,avoid connect wrong.Styling
design,Reflect the rigorous and humane custom spirit of lamps

High efficiency monocrystalline solar panel:

PAD design lights use the panel which is made of high-efficiency monocrystalline silicon, widely used in space stations
and satellites,It’s conversion rate can reach 21%,above 20%-30% than polycrystalline silico,faster charging.

LifePO4 battery:

PAD design all in one solar street lights use A1 level LifePO4 battery,deep cycle more than 2000times,high
temperature resistance,high current discharge.
Double protection
1. Double temperature control system,intelligent controller and LifePO4 battery are with temperature control
system,when temperature reach set limit temperature (60 ° C),Smart controller and lithium battery simultaneously
power off,double protection for the safety of lithium batteries.
2. An explosion-proof valve is added between each cell of the lithium battery pack,which to prevent the battery from
exploding

Intelligent microwave induction:
PAD design all in one solar street lights use intelligent microwave induction,sensor more than 12M distance,It’s two to
three times than traditional PIR motion senor,Have solved traditional microwave induction is easily disturbed.Microwave
sensor ensure effective lighting,environmental and energy saving.

Remote control user manual:
Use UVA technology,remote distance can reach 30M,four lighting modes for choose,can direct penetration of obstacles
and according sunshine of each season to adjust.
The most suitable mode can be selected according to seasonal sunshine conditions.

Installation diagram:

Purpose:

To be installed in the garden, residential area, courtyard, road, mine area or parking area or
provide the light in roads where it’s necessary, the battery provide the energy for lighting, and
the solar panel charge for the battery

Working characters:

The solar panel converts sunlight into electricity and stored in lithium battery via controller, the LED light will
work at night automatically by light sensor control, and provide lighting for the darkness area, the intelligence
induction system can save the energy when the high-brightness lighting is not necessary

Production proccess:

Package:

Precautions:
1.When installing lights, please take it lightly and gently, and it is strictly forbidden to collide or knock to avoid damage.
2.There should be no tall buildings or trees in front of the solar panels to shield the sunlight, and choose to install without
cover.
3.All the screws for installing the lamps need to be tightened and screwed tightly, and there should be no loosening.
4.Since the lighting time and power are set according to the factory specifications,if need special lighting mode should be
notified before placing the order.
5.When repairing or replacing the led chip, lithium battery, controller,type and power must be the same as our original,It is
strictly forbidden to replace the light source with different power models from any other manufacture.
6.When replacing internal parts, wiring must be strictly in accordance with the corresponding wiring diagram. The positive
and negative poles are clearly separated, and reverse connection is strictly prohibited.

Attention:
1. Please Charge All Model of light (without discharge at night) for 3 days before installing;
2. Please remove the plastic isolation film on the transparent lampshade if any before using;
3. Keep the device away from fire, water and moist places in order to avoid explosion,
leakage, moisture;
4. Any severe shock or smash to the light is not recommended;
5. No one expect professional technician should attempt to disassemble to the light in order
to avoid damaging the light

Applicable place:
Widely used in branch roads, streets, and factory roads, parks, villages, mountains and remote areas, lighting projects,
courtyards, schools,plaza and other places that require outdoor lighting,Helping domestic traditional lighting upgrade to
LED green new energy lighting.