Double Door IP55 Weatherproof Data Cabinet 1200W Air Conditioner

1. Description Of IP55 Enclosure

IP55 Enclosure is suitable for the various environment including house electronic equipment, industrial process control, external plant, telecommunications equipment, food, and medical equipment, bespoke application and many more.IP55 enclosure provides complete protection against contact with live or moving parts inside the enclosure, thus add protection from water, up to water projected by a nozzle against enclosure from any direction.

2. Accessories Options Of The IP55 Enclosure

Fan kits

Cabinet insulation

Racks and shelving

Heating and cooling systems

Silk screening and digital printing

Custom locks, hinges and brackets

Lights, alarms and other electronics

3. Technical Parameters

4. Accessories List

5. Enclosure Cooling

1 Set 1200W Air Conditioner, AC220V power supply

Two DC48V fans.

6. Cabinet Structure

(1) External Dimension W×D×H 700×700×1550mm;

(2) One compartment;

(3) Material: galvanized steel; double walls,with heat insulation between two walls.

7. Cabinet Picture:

8. GPE4890J Embedded Power System Operating Principle

GPE4890J consists of distribution unit, rectifier module (up to 3 sets) and 1 monitoring module After AC power is controlled by the AC hydraulic switch and then through the EMI board lightning protection and filtering processing, into the rectifier module, AC hydraulic switch has the function of overload and short circuit protection to AC power. Under normal conditions, every parameter of rectifier modules and distribution unit are all under control of the monitoring module, operating according to the pre-set parameter or user’s commands. If AC mains fault, the system will be powered by the battery. With the battery discharge, the terminal voltage of the battery starts to descend. When the battery voltage is under -46.2V±0.5V, the monitoring module reports battery under voltage alarm signal; When the battery voltage is under -45.6V±0.5V, close LVLD load output; When the battery voltage is under -43.2V±0.5V, close LVBD load output, then the power system stops working. When the external AC mains recovers, the system will resume to the normal work state. (All above monitoring data are system default values that users can reset).