IP55 Outdoor Telecom Cabinet With Power Distribution And Envirenmental Monitoring System

1. Cabinet Introduction

1.1 Cabinet Material

The cabinet is made of galvanized steel, double wall, thickness: 1.2mm, with 20mm PEF.

1.2 Cabinet Structure

The cabinet includes 19” rail for equipment installation.

1.3 Cabinet Door and Lock

The cabinet includes one front door, totally one door.

The cabinet door uses embedded structure.

The door opening angle is up to 110°and the door limit device can limit the opening angle. The lock is theftproof three point lock, supporting padlock. Include keys for opening the door.

1.4. Features

● Fully welded design; supplied complete, ready to go

● Lockable front door

● Rain hood included

● Sealed bottom cable entry gland

● Adjustable 19” mounting rails front and rear

● Grounding bar

● Front door rubber seal

● Cabinet design allows natural wind cooling through filtered vents on front door

● All fixings are internal to the cabinet to provide a secure solution

● Come with plinth for mounting on the floor ground, with cable gromments for the cabling

● Available in colours, Grey, Green or customized colors

2.Cabinet Technical Parameter

3.Cabinet Diagram:

4. Working conditions

(1) Applicable environment conditions:

Operating temperature: -40°C ~ + 75°C

Storage temperature: -50°C ~ + 70°C

Transport temperature: -50°C ~ + 70°C

Relative humidity (RH): 5%~99%

Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)

(2) Material: good quality galvanized steel

(3) Surface treatment: powder-coat paint, outdoor polyester light gray RAL 7035 coating

(4) Ingress protection: IP55

(5) Flame retardance: comply with GB5169.7 test A

5.Cabinet Accesories

Service Light

DC air conditioner

Power distribution unit

Envirenmental monitoring unit

Air conditioner drawing:

7. Packaging -Wooden case packaging