Hybrid Power Cabinet With Solar Energy And Power System 40U 19inch Standard Cabinet
Hybrid Power Cabinet Introduction:
The Hybrid Power Cabinet is a cutting-edge solution designed to optimize power distribution and management in modern computing and electronics systems. Incorporating advanced Hybrid Power technology, this cabinet provides intelligent control and regulation of power output, ensuring both energy efficiency and system stability.
Here are the key features and benefits of the Hybrid Power Cabinet:
40U Standard 19inch Outdoor Enclosure Hybrid Power Cabinet
Configuration list | |
Outer Size | 800mm(W)x940mm(D)x2050mm(H) (include temperature control protrusions) |
Covering Area | 800mm(W)x700mm(D) |
Height of base | 150mm |
Weight | ≤130kg (excluding the equipment and battery) |
User Space | 37U |
Material | Wall:1.2mm galvanized steel sheet Door:1.5mm galvanized steel sheet |
Lock | Three point anti-theft lock,Europe standard ock core,can change or match padlock by itself |
Wiring Position | Bottom in and out |
Wiring Holes | 10xφ36 |
Protection Grade |
IP55 |
Temperature Control Information | |
Equipment Compartment | Mode:heat exchanger Heat dissipation efficiency:200W/K Rated voltage:48VDC Rate power:520W |
Battery Compartment | Mode:DC air conditioner Cooling capacity (L35/L35):500W Rated voltage:48VDC Power consumption (L35/L35):160W |
40U Standard 19inch Outdoor Enclosure Hybrid Power Cabinet:
It is a19-inch sub-rack for hybrid power system,with 5U height compact design to meet critical application needs of fiber and microwave transmission,access device,switch..
The system's maximum power is 150A,with AC input/DC input/battery/load MCBs.The cables are front accessing with MCB and busbar.
Rectifier key features:
·Wide input voltage range:85 to 290VAC for rectifier and 120 to 420VDC for MPPT
·Rectifier,MPPT and controller are hot pluggable,easy and quick on-line maintenance
·High efficiency up to 96%for lower operating cost
·Supports ethernet,SNMP,ModBus and RS485 communication interfaces
Input Distribution | ||
AC | DC | |
Input Mode | 220VAC single-phase | 120VDC to 425VDC |
Input Frequency | 45 to 65Hz,rated value:50Hz/60Hz | / |
Input Capacity | 63A/2Px1 | 63A/2Px5 |
SPD | 20kA/40kA,8/20μs | |
Output Distribution | ||
Rectifier | Solar Module | |
Output Voltage | -42 to-58VDC,rated value:-53.5VDC | -42 to-58VDC,rated value:-54.5VDC |
Battery Breakers | 125A/2P | |
Load Breakers | Lvd:32A/1Px1,10A/IPx5; Blvd:32A/1Px2,10A/1P×5 | |
DC SPD | 20kA/40kA,8/20μs | |
Module | ||
Rectifier Module | Solar Module | |
Input Voltage | 85 to 290VAC, rated 220VAC | 120 to 420VDC rated 340VDC |
Efficiency | >96% | >96% |
Rated Power | 3000W(176 to 290VAC) | 3000W(200 to 425VAC) |
Working Temperature | -10°℃ to +75℃(fully output below 55℃) | -10℃ to +75℃ (fully output below 50℃) |
Controller | |
Signal Input | 3Al(2 battery temp,1 ambient temp),2RS485,7 DI |
Alarm Output | 6 dry contact |
Communication Port | RS485,SNMP |
Display Mode | LCD |
System | |
Dimension (WxDxH) | 482x350.6×9U,≤30kg(without modules) |
Cooling Mode | Natural cooling |
Maintenance Mode | Front maintenance,support modlule grade change |
Protection level | IP20 |
Environment | |
Operating Temperature | -10℃ to +50℃ |
Storage Temperature | -40℃ to +75℃ |
Operating Humidity | 5%to 95%(non-condensing) |
Altitude | 0 to 4000m(if the altitude is within the range of 3000m to 4000m,the maximum operating temperature decreases by 1℃ as the altitude increases by 200m) |
*customized design is available.
Cabinet pictures:
Rectificer Pictures:
IP definition
IP55/IP65
IP55= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are available
IP65= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are available
Custom with cutouts,insulation, hinges, latches or locks
Cabinet Features:
Features | Description |
Module characteristic
| The solar module has maximum power point tracking function. The maximum power point tracking accuracy is over 99.5% |
The rectifier module adopts active power factor compensation technology, the power factor value is up to 0.99 | |
The maximum efficiency of rectifier module is over 93% | |
The maximum efficiency of the solar module is over 95% | |
The solar module and rectifier module have high power density | |
The solar module and the rectifier module adopt the non-destructive hot swap technology, that is Plug-and-Play. It takes less than one minute to replace the solar module and rectifier module | |
The solar module and the rectifier module have output over-voltage protection function, including hardware over-voltage protection and software over-voltage protection. And the software over-voltage protection has two modes for option: the first time over-voltage lockout mode, the fourth time over-voltage lockout mode | |
Battery management | Perfect battery management: battery protection, and functions like automatic voltage regulating, stepless current limiting, battery capacity calculation, automatic equalization/float charge conversion, online battery test. |
Light and electricity complementary management | Perfect light/electricity complementary management function, which can achieve the priority of the solar power supply and and maximize the use of the solar energy |
Power statistic | Load electricity consumption, solar power generated energy, mains generated energy, DG generated energy, battery discharge, battery charge |
Data record | 90 days record of historical data, the historical data can be uploaded. 200 records of history alarm, 10 groups of battery test data |
Alarm function | Perfect fault protection and fault alarm functions |
Network design | Providing dry contact and other communication ports for network flexibility; Enabling proximal end software upgrade and unattended operation |
Humanized operation interface | LCD is designed with 15 degrees angle, which is more intuitional and convenient for the user’s operation. Query the operating parameters, statistics, and historical alarms of the system through the LCD. Control the system manually through the LCD |
Lightning Protection | Perfect lightning protection design at AC and DC sides |
Energy-saving design | The system, in addition to the sleep energy-saving function of the rectifier module, also supports and gives priority to the use of solar energy input to the load, makes full use of solar energy, to achieve energy saving and reduce greenhouse gas emissions |
Outdoor type | The system protection level is up to IP55, can be used outdoors. The system is compact and easy to install |
System
| All the equipment in the system support the maintenance at the front |
The system adopts rectifier module sleep technology, dual steady state contactor, low-power shunt and fan speed adjustable technology, and has more prominent energy-saving function | |
The optional AC heater makes the system work in low temperature reliably | |
Remote monitoring | The Modem is configured with GPRS function which can realize remote monitoring through providing data to the Internet server |