1. Outdoor Electrical Cabinet Description

This series cabinet is 1300mm High and 720mm Wide and 720mm Deep. For those who need more than just standard cabinet, this series can also offer a truly the security of customized solution with lots of available options, providing a climate-controlled environment for any electronic equipment, electrical load panels and cable entry solutions. It provides a secure,climate controlled environment for any electronic equipment.

2. Outdoor Electrical Cabinet Structure

Dimension:720×720×1300mm

The cabinet includes 19” mounting rack from top to down, without battery tray

The cabinet is made of galvanized steel, single wall, thickness: 1.5mm, without thermal insulation

3. Outdoor Electrical Cabinet Features

· High reliability, maintenance-free, fast assembly, suitable for harsh environment

· High integration, small footprint, short construction period, reduce the construction cost

· Improved thermal design, efficient energy saving, effectively extending the battery life

· Dynamic environment monitoring system, full alarm signal detection, real-time alarm information reported

· Outdoor cabinet suitable for a variety of outdoor environments.

4. Cabinet Parameters

5.Technical Specs

(1) Applicable environment conditions:

Operating temperature: -40°C ~ + 55°C

Storage temperature: -50°C ~ + 70°C

Transport temperature: -50°C ~ + 70°C

Relative humidity (RH): 5%~99%

Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)

(2) Material: good quality galvanized steel

(3) Surface treatment: powder-coat paint, outdoor polyester light gray RAL 7035 coating

(4) Ingress protection: IP55

(5) Flame retardance: comply with GB5169.7 test A

(6) Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2×104M/500V(DC).

(7) Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.

6.Power system connections

AC input cable connections The connectors for AC input cable are two-core AC input sockets on the front panel of system. The AC cable can be directly inserted to the connector.

Connection of DC load cables The terminals for load connection of the system are LOAD1-, LOAD2-, totally 2PIN, locating on the front panel of the system. The cable can be directly inserted into the terminal.

7.Cabinet inside Rack

8.Cabinet Picture

9.Packing :