Description:
The electronic components (resistor and diode), coils, epoxy potting, and the ceramic head are all with good high temperature resistance and good high voltage resistance, so we could make sure that our product could stably work under the high temperature work environment. In the meanwhile, we use the advanced vacuum encapsulation technology to ensure there were no bulbs in the body of product. Then we could guarantee that our ignition units would continuously and stably generate pulse sparks for long time.
We set a elastic snap joint device on the igniter unit, so you could easily install it in the gas cooker or remove it from the gas cooker. On the appearance of gas burner, we usually set the special position to install the spark plug. The appearance size of the spark plug is suitable for the install hole. So you could easily install the spark plug in the gas burner.
Specification:
TYPE | HIGH-VOLTAGE PULSE |
APPERANCE STYLE | H-STYLE |
PRODUCT CODE | IGR08 |
OUTLET QUANTITY | 2/4/6 |
WORKING VOLTAGE | AC 110~127V / AC 220~240V |
WORKING FREQUENCY | 50 / 60 HZ |
NOMINAL OUTPUT POWER | 0.6VA |
OUTPUT PULSE VOLTAGE | > 18KV |
PULSE FREQUENCY | 1~2 / 3~6 / 6~9 / >9 HZ |
PULSE SPARK LENGTH | >6MM |
GLOW WIRE TEST | GWT 850 & GWIT 775 (IEC60335-1 PART 30.2) |
FLAME CLASS | UL-94-V0 |
INPUT TERMINAL | FASTON 6.3 X 0.8 |
OUTPUT TERMINAL | FASTON 2.8 X 0.8 |
GROUND CONNECTOR | YES |
Applications:
1. Freestanding Oven
2. Gas Cooker
3. Other Home Appliances
Advantages:
Working stably under high temperature
The raw materials of the parts for ignition combination all have good high temperature resistance properties. So the ignition combination could work stably under the high temperature, at least 200 degrees centigrade.
COMPONENTS | RAW MATERIAL | TEMP. RESISTANCE |
Housing, coil frame | nylon (PA66) | >200 ℃ |
Enameled wire of coil | Copper+teflon | >200 ℃ (Teflon) |
terminal | Galvanized steel | >1500 ℃ |
Potting material of igniter unit | EPOXY | >200 ℃ |
Head part of spark plug | 95% AL2O3 ceramic | >1600 ℃ |
Wire of spark plug | Copper+teflon | >200 ℃ (Teflon) |
Good safety properties
1) Good high voltage resistance.
All of the shielding parts have good insulation properties.
COMPONENTS | RAW MATERIAL | VOLTAGE. RESISTANCE |
Housing | nylon (PA66) | > AC 600V |
Potting material of igniter unit | EPOXY | > AC 600V |
Head part of spark plug | 95% AL2O3 ceramic | > 18KV DC |
Wire of spark plug | Copper+teflon | > 18KV DC |
2) Good heat and fire resistance.
All of the non-metallic material could pass the heat and fire resistance test of GWT 750 and GWIT 775.
Our Service
1. We provide OEM service and ODM service - For some hot sellers, we designed safe, featured and fashionable packaging. They are not patented, you can sell them with your name and logo as you wish.
2. We can be your office in China, in charge of inspections and shipping. You don’t need to worry about what you will get and how you get them from Chine, just trust us, we will do everything for you.
3. Speed, quality and value - that's what most clients want from import. We stand behind each order we manage and deliver and back this with a 35-day written guarantee of satisfaction to our clients; your project will be right at our cost. It's a worry free guarantee!
4. After-sales service - All orders will be guaranteed within 12 month, and we can also make up the defective ones in the next order if there might be some in your orders.