Stable working quality and long lifetime service
1) We choose the best electronic components to manufacture the igniter. All of these components which produced by famous electronic components factories all could continuously stably work for long time.
2) In our production process, we use the advanced vacuum encapsulation technology and machines to guarantee the vacuum degree of igniter unit. The good vacuum degree could guarantee the long working lifetime of the igniter unit
Specification:
TYPE | HIGH-VOLTAGE PULSE |
APPERANCE STYLE | A-STYLE |
PRODUCT CODE | IGR01 |
OUTLET QUANTITY | 4/6 |
WORKING VOLTAGE | AC 110~127V / AC 220~240V |
WORKING FREQUENCY | 50 / 60 HZ |
NOMINAL OUTPUT POWER | 0.6VA |
OUTPUT PULSE VOLTAGE | > 18KV |
PULSE FREQUENCY | 1~2 / 3~6 / 6~9 / >9 HZ |
PULSE SPARK LENGTH | >6MM |
GLOW WIRE TEST | GWT 850 & GWIT 775 (IEC60335-1 PART 30.2) |
FLAME CLASS | UL-94-V0 |
INPUT TERMINAL | FASTON 6.3 X 0.8 |
OUTPUT TERMINAL | FASTON 2.8 X 0.8 |
GROUND CONNECTOR | YES |
Applications:
1. Freestanding Oven
2. Gas Cooker
3. Other Home Appliances
Easy to install, clean, and maintenance
We set a elastic snap joint device on the igniter unit, so you could easily install it in the gas cooker or remove it from the gas cooker. On the appearance of gas burner, we usually set the special position to install the spark plug. The appearance size of the spark plug is suitable for the install hole. So you could easily install the spark plug in the gas burner.
The igniter unit is a sealed box, it could keep things like dust out.And the surface of the product is very smooth, it is convenient for clean and maintenance.
Full range of product
1) Igniter unit
A install mode is a standard mode;
D install mode is a special mode for Europe market;
H install mode is a compact mode for Middle-east market, especially in Turkey market.
Working stably under high temperature
The raw materials of the parts for ignition combination all have good high temperature resistance properties. So the ignition combination could work stably under the high temperature, at least 200 degrees centigrade.
COMPONENTS | RAW MATERIAL | TEMP. RESISTANCE |
Housing, coil frame | nylon (PA66) | >200 ℃ |
Enameled wire of coil | Copper+teflon | >200 ℃ (Teflon) |
terminal | Galvanized steel | >1500 ℃ |
Potting material of igniter unit | EPOXY | >200 ℃ |
Head part of spark plug | 95% AL2O3 ceramic | >1600 ℃ |
Wire of spark plug | Copper+teflon | >200 ℃ (Teflon) |