Outdoor Electric Industrial Gantry Crane With Hoist Single Girder A Frame
MH gantry crane with electric hoist is middle- and small-size lifting equipment which runs at rails. It is mainly composed of gantry(girder, leg, lower cross beam,etc.), hoisting mechanism and electric control part. With the electric hoist as hoisting mechanism, it runs along the lower flange of the I-steel of the girder. The girder is of box-shaped structure and truss structure. The former boasts good techniques and easy fabrication, and the latter is light in dead weight and strong in wind resistance. The complete machine features light dead weight, simple structure and easy installation and maintenance, so that it is applicable to outdoor operational sites of medium and small lifting load for general handling such as factories and mines, freight yards and warehouses, It is prohibited to operated in the environment with inflammable, explosive and corrosive gas.
Application of Single Girder Gantry Crane
Single girder gantry crane/single beam gantry crane is used in factory, shipyard, bridge and road construction,etc to do common lifting and unloading works. This kind of crane is composed of bridge, support legs, crane traveling organ, trolley, electric equipment,strong lifting winch. The frame adopts box-type welding mechanism. Crane traveling mechanism adopts separate driver. All mechanisms are operated in the driver cabin. Power is supplied by cable or slide wire. there are different capacity double beams gantry crane for your choice according to your different use.
Technical details
Lifting Capacity | T | 3t | 5t | 10t | 16t | 20t | ||||||
Span | m | 12~30m | ||||||||||
Speed | Lifting | CD1 hoist | m/min | 8 | 7 | 3.5 | 3.5 | |||||
MD1 hoist | 8/0.8 | 7/0.7 | ||||||||||
Traveling of hoist | 20 | |||||||||||
Traveling of crane | 20/30 | |||||||||||
Operational Model | Cabin; remote control | |||||||||||
Working Duty | A3 | |||||||||||
Power Supply | Three-phase A.C. 380V, 50Hz |