5 Ton Single Girder EOT Crane European Style , Indoor Monorail Overhead Crane
LDA Single Beam EOT bridge Crane
Descriptions:
The Single Girder Overhead Crane price,5 ton overhead crane is composed of main beam, end carriage, electric hoist(or you can choose chain block), electric power transmission device and operation room(as your demand).
The single beam crane is small lifting capacity and travel along high I-Steel track.
Features:
Tight dimension, low building headroom, light dead weight and light wheel load.
It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites and warehouses.
This product adopts ground control and works at a temperature of -25--40 centigrade. It is prohibited to use the equipment at combustible, explosive or corrosive environment.
The crane applies to works and storehouses where it is ≥100 mm height between the rail surface and the rafter of roof truss.
The trolley forms a set with electric hoist, The mechanism of crane is nimble, with safe and reliable motion. It is capable of designing and making non-standard hoisting equipment
Safety features:
1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff
4. Main lifting motor: with thermal protection and currency protection.
5. Hooks with latch
6. Rubber buffers
7. Protective earthing
8. Crane switch and travel end switch
9. Sub-assemblies characteristic are tested before assemly.
10. All cranes must be preassmebled and tested before leaving factory and offer the certification of test.
Technical parameter:
Lifting capacity (T) | 1,2,3,5,10T | 16,20T | |||||||||||
Span(M) | 5.5-31.5M | ||||||||||||
Crane travelling mechanism | Travelling speed(m/min) | 20 | 30 | 45 | 60 | 75 | 20 | 30 | 45 | 60 | 75 | ||
Reducer ratio | 58.78 | 39.38 | 26.36 | 19.37 | 15.88 | 58.78 | 39.38 | 26.36 | 19.37 | 15.88 | |||
Motor | Model | ZDY21-4 | ZDY21-4 | ZDY122-4 | ZDY131S-4 | ZDY112L1-4 | |||||||
Power(kw) | 2×0.8 | 2×1.5 | 1.5×2 | 2.2×2 | 2.2×2 | ||||||||
Rotation (m/min) | 1380 | 1380 | |||||||||||
Lifting mechanism (electric hoist)&electric hoist travelling mechanism |
Electric hoist model | CD1/MD1 | MD1/HC | ||||||||||
Lifting speed (m/min) | 8,8/0.8 7,7/0.7 | 3.5 3.5/0.35 | |||||||||||
Lifting height (m) | 6 ,9 ,12, 18, 24, 30 | 12,18,24,30 | |||||||||||
Travelling speed (m/min) | 20(30) | 20(30) | |||||||||||
Motor | Taper Squirrel-cage type | Taper Squirrel-cage type | |||||||||||
Work duty | A3-A5 | ||||||||||||
Power supply | 380V 50HZ three phase and as you demand | ||||||||||||
Wheel diameter | 270mm | 370mm | |||||||||||
Width of trail | 37-70mm | 37-70mm |