Workshop Single Girder Overhead Crane , Electric Overhead Travelling Crane
Product Description
(1) Single girder overhead crane is also called single beam bridge crane, It is consists of the main girder, end girder, electric hoist.
(2) LDA electric single girder overhead crane is improved and designed on the basis of LD model. It is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1, MD1 model electric hoist as a complete set. which is the most popular use crane machinery on the market at present.
(3) LDA electric single girder overhead crane can be widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment.
The single beam crane is small lifting capacity and travel along high I-Steel track.
Features:
Tight dimension, low building headroom, light dead weight and light wheel load.
It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites and warehouses.
This product adopts ground control and works at a temperature of -25--40 centigrade. It is prohibited to use the equipment at combustible, explosive or corrosive environment.
The crane applies to works and storehouses where it is ≥100 mm height between the rail surface and the rafter of roof truss.
The trolley forms a set with electric hoist, The mechanism of crane is nimble, with safe and reliable motion. It is capable of designing and making non-standard hoisting equipment.
Single Girder Overhead Crane Drawing
Lifting capacity (T) | 1, 2, 3, 5, 10T | 16, 20T | |||||||||||
Span(M) | 7.5-22.5M | ||||||||||||
Crane traveling mechanism | Traveling speed(m/min) | 20 | 30 | 45 | 60 | 75 | 20 | ||||||
Reducer ratio | 58.78 | 39.38 | 26.36 | 19.37 | 15.88 | 58.78 | |||||||
Motor | Model | ZDY21-4 | ZDY21-4 | ZDY122-4 | |||||||||
Power(kw) | 2× 0.8 | 2× 1.5 | 1.5× 2 | ||||||||||
Rotation (m/min) | 1380 | 1380 | |||||||||||
Lifting mechanism (electric hoist)& electric hoist traveling mechanism |
Electric hoist model | CD1/MD1 | MD1/HC | ||||||||||
Lifting speed (m/min) | 8, 8/0.8 7, 7/0.7 | 3.5 3.5/0.35 | |||||||||||
Lifting height (m) | 6, 9, 12, 18, 24, 30 | 12, 18, 24, 30 | |||||||||||
Traveling speed (m/min) | 20(30) | 20(30) | |||||||||||
Motor | Taper Squirrel-cage type | Taper Squirrel-cage type | |||||||||||
Work duty | A3-A5 | ||||||||||||
Power supply | 380V 50HZ three phase | ||||||||||||
Wheel diameter | 270mm | 370mm | |||||||||||
Width of trail | 37-70mm | 37-70mm |