Monorail Single Girder Overhead Crane With Hoist , 10 Ton Bridge Crane
Advantage:
1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff.
4. Main lifting motor: with thermal protection and currency protection.
5. Hooks with latch
6. Rubber buffers
7. Protective earthing
8. Crane switch and travel end switch
9. Sub-assemblies characteristic are tested before assemly.
10. All cranes must be pre-assmebled and tested before leaving factory and offer the certification of test.
The single beam crane is small lifting capacity and travel along high I-Steel track.
Features:
tight dimension, low building headroom, light dead weight and light wheel load. It is a light duty track traveling crane with trajectory which applies to and used at machinery, assembling sites and warehouses.
This product adopts ground control and works at a temperature of -25--40 centigrade. It is prohibited to use the equipment at combustible, explosive or corrosive environment.
The crane applies to works and storehouses where it is ≥100 mm height between the rail surface and the rafter of roof truss.
The trolley forms a set with electric hoist, The mechanism of crane is nimble, with safe and reliable motion. It is capable of designing and making non-standard hoisting equipment.
The capacity: 1T, 2T, 3T, 5T,10T,16T 20T; Span from 7.5m to 28.5m
Single Girder Overhead Crane Drawing
Lifting capacity (T) | 1, 2, 3, 5, 10T | 16, 20T | |||||||||||
Span(M) | 7.5-22.5M | ||||||||||||
Crane traveling mechanism | Traveling speed(m/min) | 20 | 30 | 45 | 60 | 75 | 20 | ||||||
Reducer ratio | 58.78 | 39.38 | 26.36 | 19.37 | 15.88 | 58.78 | |||||||
Motor | Model | ZDY21-4 | ZDY21-4 | ZDY122-4 | |||||||||
Power(kw) | 2× 0.8 | 2× 1.5 | 1.5× 2 | ||||||||||
Rotation (m/min) | 1380 | 1380 | |||||||||||
Lifting mechanism (electric hoist)& electric hoist traveling mechanism |
Electric hoist model | CD1/MD1 | MD1/HC | ||||||||||
Lifting speed (m/min) | 8, 8/0.8 7, 7/0.7 | 3.5 3.5/0.35 | |||||||||||
Lifting height (m) | 6, 9, 12, 18, 24, 30 | 12, 18, 24, 30 | |||||||||||
Traveling speed (m/min) | 20(30) | 20(30) | |||||||||||
Motor | Taper Squirrel-cage type | Taper Squirrel-cage type | |||||||||||
Work duty | A3-A5 | ||||||||||||
Power supply | 380V 50HZ three phase | ||||||||||||
Wheel diameter | 270mm | 370mm | |||||||||||
Width of trail | 37-70mm | 37-70mm |
Components: