Refractory Nitride ceramic plate Si3N4 plates silicon nitride ceramic substrate
Product Description
Bulk density | Kg/m3 | 3.2×103 | ||
Water absorption | % | 0 | ||
Mechanical properties | Vickers hardness load 500g | (GPa) | 13.9 | |
Flexural strength | MPa | 610 | ||
Compressive strength | MPa | 3820 | ||
Young's modulus of elasticity | GPa | 290 | ||
Poisson's ratio | - | 0.28 | ||
Fracture toughness | MPa√m | 5 | ||
Thermal characteristics | Linear thermal expansion coefficient | 40-400℃ | ×10-16/℃ | 2.6 |
40-800℃ | 3.2 | |||
Thermal conductivity | W/(m·K) | 20 | ||
Specific heat | J/(kg·K) | 0.66×103 | ||
Thermal shock resistance(Put into the water) | ℃ | 550 | ||
Electrical characteristics | Dielectric strength | V/m | 10×106 | |
Volume resistivity | 20℃ | Ω·cm | >1014 | |
300℃ | 1012 | |||
500℃ | 1010 | |||
Dielectric constant (1MHz) | - | - | ||
Dielectric loss angle (1MHz) | (×10-4) | - | ||
Loss factor | (×10-4) | - | ||
Chemical properties | Nitric acid (60%) 90℃ | WT Loss Mg/cm2/day | 1.00 | |
sulfuric acid (95%) 95℃ | 0.40 | |||
Sodium hydroxide (30%) 80℃ | 0.36 |
Advantages
Our Si3N4 plate and board can work in many kinds of difficult environment, such as strong acid and alkaline, high temperature,etc.
Si3N4 ceramic has very long lifespan, and because of it’s high wear resistance and low density, many plants use it instead of alloy steel, Zirconia, and aluminum ceramic.
FAQ
Q: Is it possible to provide samples?
A: We can supply 1-2 samples, but we do not bear the shipping cost of the samples.
Q: How long is the delivery time usually?
A: Product delivery is subject to order quantity and processing requirements, and different product delivery times are inconsistent. Generally speaking, the delivery time of 1-2 common product samples is about 35 days.
Q: Which payment methods are supported?
A: T/T; credit card. Currently our company supports these two payment methods.
Q: What is the shipping date? How long can I ship?
A1: Shipped within 72 hours after the balance is settled
A2: After the production of the product is completed and passed the internal inspection of the company, we will send the finished product image to the customer for confirmation. After the balance is settled, all the products will be sent to the customer's designated delivery location.