Guard2 PID FGM200X Organic Gas Detector 4-20mA Analog Signal Output
Standard configuration of RAEGuard2PIDFGM-200X organic gas detector:
• Detector host
• Operating Instructions
• Gas hood
• Mounting accessories
Optional accessories:
• Audible alarm
• Standard gas
• Pressure reducing valve, etc.
Mounting accessories
• Threading connector
• Compression nut
• U-shaped mounting clips
• Install the backplane
• Gas hood
• Rain cover
• Plug
Datasheet:
Working power | 10~28VDC |
ZD power | 210mA@24VDC |
Output signal | 4~20mA, can be fine-tuned |
Load impedance | 600Ω |
Detection accuracy | ±3%F.S. |
Response time (T90) | <15s |
Protection class | IP65 |
Electrical Interface | 3/4” NPT M |
Mounting method | 2" riser/wall mount |
Other outputs | RS485 Modbus; three-stage passive relay 30VDC 2A, normally open/normally closed optional |
Ambient temperature | -40℃~+55℃ |
Ambient humidity | 0~95% RH (non-condensing) |
Ambient pressure | 90kPa ~110kPa |
Display mode | 128×64 dot matrix LCD, support graphic display |
Dimensions | 257mm×201mm×107mm (HWD) |
Housing Material | Stainless Steel |
Weight | 3.5kg |
SP-2104