7HH Electrochemistry Hydrogen Sulphide 0-50ppm For Gas Analyzers Hydrogen Sulfide Detector
IMPORTANT NOTE:
Connection should be made
via PCB sockets only. Soldering to the pins will
render your warranty void.
Cross-sensitivity Data:
CiTiceLs may exhibit a response to certain gases in a sample other than the target gas. 7HH CiTiceLs have been
tested with a number of commonly cross-interfering gases and the results are given below. The table shows the typical
response to be expected from a sensor when exposed to a given test gas concentration (relevant to safety, e.g. TLV
levels).
Relative Humidity Range | 15 to 90% non-condensing |
Typical Baseline Range (pure air) | -0.2 to +0.4ppm equivalent |
Maximum Zero Shift (+20°C to +40°C) | 0.1ppm equivalent |
Long Term Output Drift | <2% signal loss/month |
Recommended Load Resistor | 10Ω |
Bias Voltage | Not required |
Repeatability | 1% of signal |
Output Linearity | Linear |