5SFF Sulphur Dioxide gas sensor For gas analyzers
CiTiceLs may exhibit a response to certain gases in a sample other than the target gas. The table below shows the
typical response of 5SF/F sensors to a number of common cross-interfering gases. The figures are expressed as a
percentage of the primary sensitivity (i.e. sulphur dioxide = 100%).
Temperature Range | Temperature Range |
Pressure Range | Atmospheric ± 10% |
Pressure Coefficient | ≈ 0.08 % signal/mBa |
T90 Response Time | <40 seconds |
Relative Humidity Range | 15 to 90% non-condensing |
Long Term Output Drift | <2% signal loss/month |
Bias Voltage | Not required |
Repeatability | 1% of signal |