About Oxyhydrogen Brazing Machine
It is used for preheating the welded parts of copper tubes. Heat the copper pipe welding place with the flame. When the copper pipe is heated to purple-red, remove the flame and lean the solder on the welding junction, so that the solder flows into the welded copper parts after melting, and then the welding can be completed.
Oxyhydrogen Brazing Feature
1. Concentrated oxyhydrogen flame: higher welding speed than oxyfuel gas welding.
2. Convenient operation: Only consuming pure water and electricity, no gas cylinders. One machine can replace the acetylene gas bottle and oxygen bottle.
3. Energy saving: it can save 35%-57% fuel compared with propane and acetylene.
Technical Parameter
Model | OH2000 |
AC Voltage(V) | 380 |
Rated Power(KW) | 9 |
Gas Output(L/h) | 0-2000 |
Working Pressure | 0.1-0.2Mpa |
Max. Water Consumption(L/h) | 1.08 |
Water Feed | auto |
Dimension(L*W*H-mm) | 1070*670*1000 |
Weight(kg) | 280 |
Vertilation Space Requirement(mm) | 400 |
Standard Accessories List
1*electronic flame arrester,1*flame torch, and 3m blue gas tube;
Note: the package does not contain the electrolyte powder(KOH), you can buy it locally.
We can provide a centralized gas supply scheme, special accessories, OEM, or ODM service according to the project.