Automatic paint mixer for paint colorant , ink mixing machine

Brief Introduction

The YIJIU automatic gyroscopic mixer YJ-2A-02 is works on the theory that the table revolve around the shaft meanwhile rotate on their axes with the character of high-efficiency , high-speed .It is suitble to big package and high viscosity chemical liquids mixing .

Application:
Chemical liquids : paint colorant , coating , ink , glue , etc.

Features

Two motor: one is clamping motor and one is rotating motor in the mixer. Adjustable: Clamping pressure and rotating speed is adjustable. Durable: he belt is automotive belt imported from Japan, it's durable. Convinient: The lower plate can be pull out. easy to put the mixing can on or off.Thoroughly mixing: rotation and revolution go simultaneously during mixing, which solves the problem of uneven and long time mixing caused by single direction rotation.

Technical Data

Sample Show

1. Adjustable:
a. rotating speed is adjustable (80 r/min--150 r/min) to meet the needs of different mixing materials. The data of inverter is automatically set, leaving you no trouble when replace inverter.

b. Clamping strength is adjustable, which meets the needs of different size canisters, and also ensure the stability and no deformation force.





Mixer machine FAQ

1. What's weight of the machine?

2. What's the packing size for shipping cost?

3. What's the max mixing ability?
20L, 35 kg, 5 US gallon

4. Can it be used for other liquid except paint?
yes, any liquid chemicals

5. Which types of drums can be used for mixer?
Round or Square both OK, but the upper and bottom should be flat.

6.Can it adjust time and speed?
yes,
Time: 15S , 30S , 45S...9mins 45s
Speed: two levels, low speed for big cans and high speed for small cans.



Our Service

1. Warranty Service: Warranty period is 12 months. Within guarantee period,we can help you judge the fault according to the failure phenomenon by E-mail. and send replacement part to you except for the man-made factors.

2. Training:You can send personnel to our factory for free training on the machine.

3. Inspection: You can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts.

4. Testing of equipments: all our machines are tested before shipment. All machines are at its optimal state when shipped.

Contact Us