18L - 20 L automatic paint mixer for chemical liquid mixing

Brief Introduction

• Working theory: the table revolve around the shaft meanwhile rotate on their axes with the character of high-efficiency , high-speed .
• Application:paint colorant , coating , ink , glue ....different chemical liquid. Fit for big package and high viscosity chemical liquids mixing .

Technical Data

Size :

Weight:

Features

1. Mixing time " 15 second to 9 min 45 second " can be set. (If special requirement of the mixing time, please contact us ).
2. Inverter control the clamping force and intelligent identify the paint drum size and weight to give the correct mixing speed.
3. Speed of 80r/min to 150r/min can be set.
4. You can pull out the lower clamping plate to load the big and heavy paint drum on it easily.
5. The top cover can be opened to repair or replace parts conviniently.

6. Rotation and revolution go simultaneously during mixing, which solves the problem of uneven and long time mixing caused by single direction rotation.

7. LCD displays in Chinese or English; the failure testing program can judge the fault easily for

   you.

Sample Show

• With wheel under the bottom, convinient to move the mixer machine.
• Safelock on the door, machine stop working when the door is open, make operation more safe.Error alarm when wrong operation.

Mixer machine FAQ

1. What's the max mixing ability?
20L, 35 kg, 5 US gallon

2. Can it be used for other liquid except paint?
yes, any liquid chemicals such as : ink , glue , coating , colorants

3. Which types of pails can be used for mixer?
Round or Square both OK, but the upper and bottom should be flat.

4.Can it adjust time and speed?
yes! MixingTime can be set: 15S , 30S , 45S...9mins 45s
Speed can be set: two levels, low speed for big cans and high speed for small cans.

5. What's your after sales service provided?
one year warranty and free spare parts provided

6. What's the packing size for shipping cost?

Our Support to the Agent

• Inspection: The agent can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts.
• Training:The agent can send personnel to our factory for free training on the machine, testing and maintaining.
• Warranty Service: We share the after-sales service with our agents, division is as follows: We provide free spare parts to our agents and help to judge the fault according to the failure phenomenon by E-mail within the 1st one year. However, if the issues is man-made, we will sell new spare parts to the agent at a favorable price.
• For easily damaged accessories: we recommend the agent prepare more for emergency use. When the retail customers have any issues on the machine, the agent should solve in time and all the cost of after-sales should be billed to the agent. In case of any remaining issues out of the agent's technical ability, our technician can be sent but all the service cost should be pay by the agent.