Industrial paint mixing machine , automatic mixers for wall paint


Brief Introduction

The automatic gyroscopic mixer YJ-2A-02 designed by YIJIU Co., It works on the theory that the table revolve around the shaft meanwhile rotate on their axes with the character of high-efficiency , high-speed .It is suitble to different chemical liquids : paint colorant , coating , ink , glue , etc. Fit for big package and high viscosity chemical liquids mixing .
Can be used to mix chemical liquids : paint colorant , coating , ink , glue , etc.


Technical Data

Features

1. High quality clamping motor and rotating motor, ensure machine life long.

2. The lower clamping plate fit for different size of pails, also can mix 1 to 4 small pails in the same time.

3. Rotating speed is adjustable (80 r/min--150 r/min) to meet the needs of different mixing materials. The data of inverter is automatically set, leaving you no trouble when replace inverter. Clamping strength is adjustable, which meets the needs of different size canisters, and also ensure the stability and no deformation force.

4. The lower plate can be pull out. it's convinient to put the mixing can on or off.

5. Rotation and revolution go simultaneously during mixing, which solves the problem of uneven and long time mixing caused by single direction rotation. Ensure thoroughly mixing:


Sample Show

Mixer machine FAQ

1. What's the max mixing ability?
20L, 35 kg, 5 US gallon

2. Can it be used for other liquid except paint?
yes, any liquid chemicals such as : ink , glue , coating , colorants

3. Which types of pails can be used for mixer?
Round or Square both OK, but the upper and bottom should be flat.

4.Can it adjust time and speed?
yes! MixingTime can be set: 15S , 30S , 45S...9mins 45s
Speed can be set: two levels, low speed for big cans and high speed for small cans.

5. What's your after sales service provided?
one year warranty and free spare parts provided

6. What's the packing size for shipping cost?

Our Support to the Agent

Inspection: The agent can send inspectors to our factory for inspection or we self-inspect following the technical requirements mentioned in contracts. Training:The agent can send personnel to our factory for free training on the machine, testing and maintaining.

Warranty Service: We share the after-sales service with our agents, division is as follows: We provide free spare parts to our agents and help to judge the fault according to the failure phenomenon by E-mail within the 1st one year. However, if the issues is man-made, we will sell new spare parts to the agent at a favorable price. For easily damaged accessories: we recommend the agent prepare more for emergency use. When the retail customers have any issues on the machine, the agent should solve in time and all the cost of after-sales should be billed to the agent. In case of any remaining issues out of the agent's technical ability, our technician can be sent but all the service cost should be pay by the agent.