Luxury Design Spray Room Down Draft Painting Spray Booth Ce BZB-8500
Types of Industrial Spray Booths
Industrial spray booths differ from one another based on three major characteristics: cabin style, airflow design, and type of air pressure. The cabin, or the booth itself, can be either open face (no doors) or closed face (with doors). Additionally, the airflow of the spray booth can be designed in a full downdraft, semi-downdraft, side-draft, or cross flow style. Air pressure in an industrial spray booth can be either positive or negative depending on its application.
1 | EPS colorful steel skin panel thickness increase from 50mm to 70mm, heat-insulation better, Strength increase, increase of service life. |
2 | Full grilles make by flat and bar steel, then galvanized. |
3 | Three Ramps made of embossed plate, 2000(L)*900(W) mm, it can suitable for all wheel base car, easy for car to drive in. |
4 | 2 sets 4kw Centrifugal Inlet Ventilator, Capacity: 24000m3/h, equipped a exhaust cabin, inside carry one set 7.5kw exhaust fan, it has environmental function, Capacity: 20000m3/h. |
5 | In the Intake and exhaust system, add a separate intake cabin, internal recycle sufficient, faster of rate of temperature increase, energy efficiency. |
6 | Heat exchanger equipped pressure relief device, more safety. |
7 | Equipped with 20N Switzerland original electric damper motor, stronger. |
8 | With Ceiling light and side light |
9 | Main door and emergency door glasses are toughened glass. |
10 | Control system: Micro-Computer Programmed Style control,motor Y-detal start. |
About Us:
JingzhongJing(JZJ) Group company was set up in 1999,now is a large comprehensive company which
specialies in the design,manufacture,sales,service for Pre-treatment,Painting lines and Exhaust Gas
treatment equipments.
Main Product:
Spray booth/Preparation room/Water testing line for Car/Bus/Truck/Train/Boat/aircraft ect;Sand Blasting
Room/Shot Blasting Room/Power Coating/Painting line,Exhaust gas(Vocs treatment equipment for all kind
of Industry Product ect.
Two Produce Base:
China South Produce Base (In Guangzhou,Since 1999)
China North Produce Base (Jiangsu,Since 2007)
Some of our Project.
----------------------------------------FAQs-----------------------------------------
Are you Trade company or manufacturer?
We are the manufacturer with export liscence.We have two factory in Guangzhou and in Jiangsu,China.
How can we cooperation?
How can we cooperation?
1. Turn Key Project:
Our company will be responsible to help you to do the production line desing,manufacturing,installation,
debugging and your personnel trainging jobs,Also we will provide you one-stop service for your
production facilities procurement.
2. Equipment Supply:
Our company will not only provide you the equipments,but also will offer you the onsite installation
instruction and guidance as well.
3. Other coopeation style.
Keep flexible and discuss.
How about after sale serivce?
1. Provide technical support and production line upgrade
2. Feedback withini 12h after receive fault notification or service requirement
3. Free training on the user’s manual
4. User-friendly English manual or operation video for machine using and maintanence.
5. On-the spot trainging and installation can be met if required.
6. On time delivery.
7. One Year Gruantee.