European Standard Composite Wood Pallet Block Machinery

Introduction of European Standard Composite Wood Pallet Block Machinery

European Standard Composite Wood Pallet Block Machinery is designed to produce pallet block, which is for the transportation pallet. And European Standard Composite Wood Pallet Block Machinery could recycle the wood waste efficiently, and it is changing the waste wood into pressed wood pallet blocks, so it helps to protect the environment. The final pallet block could get the E1 grade. The finished pallet block can be solid without a hole in the middle and also can be hollow.

How does European Standard Composite Wood Pallet Block Machinery Work?
1. The hydraulic cylinder provides high pressure and pushes the piston to extrude and mold the materials.
2. The heating of the heating plate at the high temperature promotes the solidification and molding of urea-formaldehyde glue.
3. Cutting according to a certain length (usually around 1.2 meters).
4. After cooling, European Standard Composite Wood Pallet Block Machinery cut the long wood strips of half-finished products to the final size.

Parameters of European Standard Composite Wood Pallet Block Machinery

Easy to operate. One person could handle 3 machines. One set of European Standard Composite Wood Pallet Block Machinery could make two different block sizes.

Saving the production cost and enhancing the process of automation. The price of the raw materials is less than 50%, so the production cost is also lower than 50%. In addition, the technology process of European Standard Composite Wood Pallet Block Machinery is easier and easy to operate.

Pallet block sizes of European Standard Composite Wood Pallet Block Machinery
Normally 90*90 mm, 90*100 mm, 100*100 mm, 80*90 mm, and so on according to the inlet fork height of the forklift. If you have special requirements, we could customize it while, it ranges from 75 mm to 145 mm.
Final European standard 90*90 mm pallet blocks

1. Free fumigation and free quarantine. Because the pallet block is made by hot pressing and meets ISMP 15.
2. The load capacity is higher than the sawdust pallet feet.
3. Smooth appearance after grinding, consistent with the color of the board.
4. Lower the production cost, because the raw materials are leftover materials.
5. The density of the pallet block could get to 550-1000 kg/cbm.
6. Meeting the E1 grade.
7. Customized sizes are available.

Raw Materials for European Standard Composite Wood Pallet Block Machinery
Urea-formaldehy glue. Wood shavings, wood sawdust, small wood chip, and other wood waste materials (the moisture content is about 10-12%).