Collated Nails 15 Degree Golden Zinc Roofing Coil Nails - 7200Pcs Box

Specification 0f Roofing Coil Nails
Material: Steel Q195
Head Diameter: 5.0--8.0mm
Head Thickness: 1.00-0.1mm
Length: 3/4inch,7/8inch,1inch,1-1/4inch,1-1/2inch,1-3/4inch
Shank Type: Smooth/ Screw/ Ring
Shank Diameter: .120''
Welding Position: 8-19mm/19-37mm/19-52mm
Point Type: Diamond /Blunt /Chisel
Finish: Bright/Yellow Painting/Electro Galvanized (EG)/Hot Dip Galvanzied (HDG)/ Stainless steel

ASTM F 1667

TAS 114 APPENDIX E

Statement of Compliance:
The product was tested in accordance with ASTM F 1667-15 Standard Specication For Driven Fasteners:Nails,
Spikes,and Staples and Miami-Dade Country Checklist #0195 for the certification and listing of roofing fasteners,The product
demonstrated compliance with ASTM F 1667 for a ring shank roofing nail,and met the requirements for corrosion resistance
after 140 cycles of TAS 114 Appendix E.



Finish Product Picture

Our Coil Roofing Nails are manufactured according to the roofing industry specifications. These nails are 7/8" length 15 degree wire collated with a head diameter of 3/4”-1 3/4” (3/8" dia.) Made of .120" (11 gauge) SMOOTH shank Electro Galvanized steel. Electro Galvanized steel provides a very thin layer of coating with a measure of protection against the elements. Commonly used in composition asphalt shingles applications. Not recommended for ACQ Treated Lumber. Each Box contains approximately 7,200 nails.







Application For

ROOFING COIL NAILS ARE SHOTED BY NAILS GUN(COIL NAILER) CONTINOUSLY. THE ADVANTAGES IS TO REDUCE MANUAL LABOR AND INCREASE PRODUCTIVITY. IT IS WIDELY USED, ESPECIALLY SUITABLE FOR CONSTRUCTION, DECORATION, FURNITURE, WOOD PACKING, AUTOMOTIVE AND OTHER INDUSTRIES .