ISO&CE Approved China Warehouse storage heavy duty drive in pallet rack

logistic electronic equipment drive in pallet racking/ logistic drive in pallet rack

Description:

1) Suitable for large amount of cargo with small number of kinds;

2) The height of each beam can be adjusted by pitch 75mm freely

3) Smart section design and high-quality steel

4) It facilitates the use of forklift trucks, electric reach trucks, narrow aisle turret trucks

5) It is the most widely used design of the storage system

6) Parts: upright poles, pallet support arm , wall ties, horizontal bracing, connection column, wire mesh deck, safety pins, wire footing plates etc.

7) Material: high quality steel; such as Q235

8) Max load capacity: as required

Advantages about warehouse Drive in rack:

1.Many kinds of specifications are available.
2.offering high density storage system .make the most use of warehouse space.
3.Each aisle consists of several levels of pallet support rail .pallets are placed on

pallet support rail one after another.
4.top and back bracing are used to fix the whole racking ,making the whole racking safe and

stable.
5.first level pallets can be placed on the floor.
6.Trucks can drive right into the center of the block between any uprights on the front

face to pick up pallets .as the design doesn't require cross beams which would block entry.

When should you specify Drive-In Racks?

• Drive-In Rack is used to store many pallets of a similar SKU or product. Lift trucks drive into the rack to extract the first pallet they come to. This is "Last-In, First-Out" storage.
• We've installed Drive-In and Drive-Through Racks in a number of cold storage applications, due to the need to store as many pallets as possible in as little expensive freezer space as possible.
• When you have seasonal items that move quickly out of your inventory.
• When you have a large amount of similar items that can be stored in a single pallet position and accessed last-in, first-out
• If you don't store a wide variety of loads in the rack

Drive-In pallet racks - you use the same entry and exit point on each aisle / storage bay to access your loads, creating last-in/first-out storage.

Drive-In pallet racks - you use both the front and back of each aisle / storage bay to access your loads, creating first-in/first-out storage.
Height and depth can be designed to meet your specific needs.

Features:

1. Drive in rack consists of upright frame, pallet rail, single and double side arm, top beam, back beam, single and double side spacer, big and small top bracing, back bracing, guide rail, upright protector and so on.

2. Paller weight is no more than 1500kg. The goods stack height on the pallet is no more than 200mm which certainly could be designed by your request.

3.Drive in rack can make use of 75% of the warehouse space, is a kind of high density storage system. It can accomodate twice more pallets than pallet rack.

3. Drive in rack is a kingd of First-in-Last-out storage system, suits for storing these goods which is of fast turnover, unified and with long shelf-life.

4. Shelf: Guidable for pallet placing by tuck up bevel;

5. Concave bolted to avoid the influence of pallet moving;

6. Pin-type connector: high capacity, deform-proof, easy to install/dismount, safe and reliable.

Drive In / Drive Thru Warehouse Drive In Pallet Rack Features and Benefits include:
(1).Highest density pallet racking system available.
(2).Makes best use of the available surface and height space than any other system.
(3)Allows for load flexibility in regards to both weight and volume.