OEM Automatic Barrier Gate Boom Automatic Car Parking Barriers Access Control

Product Specifications:

Functions&Features of Barrier Gate:

• 1. Manual release device to operate the barrier when power off.
• 2. Motor cooling fan to avoid the over-heating possibility
• 3. Automatic reversing when the barrier boom meets the obstruction
• 4. Auto closing realization through menu setting on the control panel
• 5. Interfaces available for infrared photocells, loop detectors, card readers, ticket dispensers, manual switch (wire control), traffic light
• 6. RS485 Communication Module is compatible
• 7.100% pure copper motor

​Working Environment:

Each automatic barrier gate inlcuding:

• 1 pcs automatic barrier gate
• 1 pcs arm boom (from 1m to 6m can customised)
• 1 pcs control panel(built inside)
• 4 pcs spring
• 1 pcs motor
• 1 pcs capacitor
• 1 pcs limit switch

Communication with customers

1. Motor works but there is no reaction on the arm.

a. Please check whether the clutch device is locked or not.
2. There is too much vibrant when the boom is rising or falling.
a. Please check whether the shock absorption rubber is broken or not, if yes, change a new one.
b. Please check whether the balance spring is overused and distorted. If yes, change a new one.

3. The boom could not rise up or fall down to the end.
a. When change a long boom to a short one, please readjust it.
b. The sensor does not plug well, please chek it.
c. The " Speed adjust switch" is wrong adjust, please readjust it.
4. The distance of the remote control decreases.
a. Check whether the charge capacity of the remote controller is enough or not.
5. There is no reaction when pressing the remote controller buttons.
a, Please check whether the power is supplied to the barrier gate or not.
b. Please check whether the fuse is burnt out or not.
c. Please check whether the code both in the remote controller and the control board are accordant or not.