Long Range RFID reader (1-6M) (ISO18000-6C EPC G2): typical 2-3M

In the far-distance RFID system, the ID tag has much less energy compared to that of the reader. This imposes a very high requirement on the reader's receiver sensitivity. In LinkSprite's far-distance RFID system, the receiving and transmitting paths are separated, and using different frequencies. Normally, the transmitting power is between 100mW~500mW.

MX-9U has the feature of multiple-protocols, fast response time, multiple-tag reading, directional antenna, and water-proof design that can be used outdoors.

The application of MX-9U can be used in the following:

• Description of RFID UHF reader :

  The RM9001&RM9002 RFID Reader is a new and innovative antenna built-in integrated RFID Reader that is compatible with IS018000 and EPC Class 1 Gen2 of RFID tags. It solves many problems successfully associated with remote identification, identification of fast moving objects and multi-card identification for The Passive RF tag. This RFID Reader's design includes a Weigand port, a RS485 port and a RS232 output interface. This product exceeds the basic capability recommended by the advanced technology indicators.

  
  Technical Parameter of RFID UHF reader :

  Parameter	MX-9U	MX-20U
  Support Protocol	ISO18000-6B/ISO18000-6C/EPC Class1G2	ISO18000-6B/ISO18000-6C/EPC Class1G2
  Working Frequency	ISM 902MHz~928MHz,available to customize 860~960Mhz	ISM 902MHz ~ 928MHz,available to customize 860~960Mhz
  Working Mode	FHSS or fixed frequency set by software	FHSS or fixed frequency set by software
  Transmit Power	0dbm ~ 18dbm ( 1mW ~ 1000mW )	0dbm ~ 31dbm be adjusted by software
  Read Speed	The average read time for single card is less than 6ms per 64 bits	Single card 2000times/minute,multiply card 200pcs/second
  Read Type	automaticlly reading card at regular time,can set reading card way	Timing and auto reading, external trigging to control reading, set by software.
  Data Output	Wiegand 26/34 port , RS232 , RS485, TCP/IP(customize),CANBUS(customize)	Wiegand 26/34 port , RS232 , RS485, TCP/IP(customize) , TLL(customize)
  Data Input	One group of triggering input signal	One group of triggering input signal
  Antenna	build-in linear polarization antenna, gain 12dB	build-in linear polarization antenna, gain 12dB
  Power supply	Adapter (into +12V DC)	Adapter ( +9V~+12V DC)
  Power Consumption	Less than 6W	Less than 6W
  Dimension	230mm×230mm×58mm	440mm×440mm×68.6mm
  Weight	1kg	4kg
  Working Temp	-20ºC~+80ºC	-20ºC~+80ºC
  Read Distance	3-6M (according to tag),can adjust by software	12-20M (according to tag),can adjust by software
  Read Prompt	Buzzer and led	Buzzer and led