220V Orange Automatic Parking Barrier Gate with Arms and Low Noise Motor

WHAT IS Max Barrier Gate ?

A boom barrier, also known as a boom gate, is a bar, or pole pivoted to allow the boom to block vehicular access through a controlled point. Typically the tip of a boom gate rises in a vertical arc to a near vertical position. Boom gates are often counterweighted, so the pole is easily tipped. Boom gates are often paired either end to end, or offset appropriately to block traffic in both directions. Some barriers also feature a pivot roughly half way, where as the barrier is raised, the outermost half remains horizontal, with the barrier resembling an upside-down L when raised.release of vehicles.

Technical Data

An Automatic parking barrier can be operated through:

00001. Push Button

00002. Remote Control

00003. RFID Tags / RFID Reader

00004. Loop Detectors

00005. Any third party access control device

Functions & Features

1) Manual release
2) Machine core with compression spring,effectively avoids the accidents caused by spring breaking
3) Die-casting aluminum alloy motor,precision and good at thermal riadiating
4) Motor cooling fan,slowing the problem of heat-protection
5) Double safety limit switches(photocell electrical limit switch/motor memory sensor)
6) Reversing on obstacle
7) Auto-closing
8) Support the INFRARER PHTOCELL for anto-bumping function(optional)
9) Support the external and internal VEHICLE LOOP DETECTOR(optional)
10) Traffic light interface
11) Wire control(switch signal)/ Remote control(418MHZ)
12) RS485 communication module(optional)

WHY CHOOSE US ?

The MAX barrier gate series ,which manufactured by our company,adopt the latest automatic technology and intelligent design ahead in this field .Meanwhile our barrier gates series have the promethean design,such as humanization clutch device,balance device,which makes our barrier gates work more safely and conveniently.And we believe our barrier gate series can meet your high quality demand.


HOW TO USE ?

1. Please select the right type of the barrier gates according to the specifications of the place.Fix the barrier gate case board with expansion bolts.
2. Fix the boom to the boom tray with the boom press board, then cover the boom capuche with the screws. After that ,fix the cover of the boom to the splint and fasten them with four screws of 4*16, and slip the cover tap with the cover by two 3*10 screws.
3. Unlock the clutch device with the clutch key clockwise .Move the boom to the horizontal and vertical manually to make sure there is no obstruction.Then turn on the power .