Conference Room Commercial Cheap Folding Partition Doors Movable Walls
Movable partition walls usage:
(1)Size of wall: all panels should be installed in accordance with the manufacturers recommendations.
(2)Cutting: all necessary hardware and accessories for a complete job installation are to be furnished by the contractor.
(3)Install the acoustic panels: the installation of acoustic panels should be carried out in a sequence from the left to the right, from upside to downside, the panels are cut to fit on site, traditional woodworking tools are suitable for cutting the panels, if panels are cut using a fine tooth table saw the panels should be cut face up to avoid scratching and at a much slower speed to avoid any tearout or chipping.
(4)Fix on keel:
Wooden keel fixing using nails, staples or screws into prefixed timber battens on the walls via the tongue and groove joint.It also can fixing by: light steel keel.
(5)Ensure the movable partition walls is stable,they should be paralleled with the ceiling.If the ceiling was done,it should remove a little to install the tracks.
(6)The floor has no tracks,so it will not damage the floor and it will not swing easily.
Movable partiiton walls specification
1. Eight characters and functions:
(1) Hang track on the ceiling, not the floor;
(2) Heat insulation and fireproof
(3) Stable and safe
(4) Energy-efficientcy
(5) Elegant appearance
(6) Collection convenient
(7) Widely used in different places
2. Type:
Type 65 is suitable to use at 2m-3.5m height space.
Type 85 is suitable to use at 2m-6m height space.
Type 100 is suitable to use at 3m-9m height space.
3. Each panel load-bearing weight: 225kgs/ 450kgs/ 650kgs
4. Sound insulation coefficient:
Type 65 highest sound insulation coefficient can be reach is 36db.
Type 85 the highest sound insulation coefficient can be reach is 50db.
Type 100 the highest sound insulation coefficient can be reach is 53db.
Technical data of Type 65 movable partition :
Panel Suspension | Top hanging system without the need for a floor track. |
Panel Width | Each panel 600mm-1200mm. |
Track | Aluminum Or Steel Track |
Roller on panel | Single or Double Roller |
Panel Frames | Heavy-duty steel-gusseted aluminum inner frames reinforced with full height. |
Top and bottom seals | Top and bottom pressure retractable seals ensure effortless moved and locked. |
Module | 700mm - 1200mm maximum. |
Panel stacking | Numerous panel stacking options for complete flexibility. |
Panel Surface | MDF,Plywood, woven fabric, Leather,Natural wood veneer, Melamine,Wood moldings, etc. |
Finishes | Satin anodized or polyester powder coating to all exposed aluminium components available in a wide range of colour as standard. |
Sound proof movable partition walls details