General Electric IC697BEM711 Bus Receiver Module (BRM) GE IC697BEM711

Petrotech Keeps It Going

The terminator plug which is supplied with each BRM is only required in the last BRM in the chain as shown in figure 2. It may be discarded or saved as a spare if this BRM is not at the end of the chain. If this BRM is at the end of the chain, the terminator plug is installed in the lower expansion port, which is labeled EXPANSION PORT OUT. The plug should be secured with its attached screws.

This module includes a mechanical key that prevents inadvertent substitution of one module type for another in a given slot. The key fits a uniquely shaped area on the board below the connector. The key is included with each module. When the module is first installed, the key latches onto the backplane center rail. When the module is extracted, the key remains in the center rail, configuring the slot to accept only identical module types.

About GE Fanuc Products

GE PLC 90-30 Series

GE PLC 90-70 Series

GE PACSystems RX3i

GE PACSystems RX7i

GE VersaMax

GE VMIC

GE Mark VIe

GE Fanuc CNC

GE Field Control

GE Genius I/O

GE QuickPanel

GE Series One

GE Multilin Module

Petrotech 90-70 and 90-30 Upgrade Advantages

• Over 40 years of Petrotech turbomachinery expertise

• 100% code transfer— fully integrated functionality

• IEC-61131 standard programming

• Re-use much of the existing 90-70 system

• Easily increment additional capacity

• New CPU forms base of future system

Our Services

We like to work with our customers to ensure that you have the best possible experience when buying from our stores. If you have any questions or problems, we will be more than happy to cooperate with you. If you have any questions, please contact us before leaving neutral or negative feedback so we have a chance to work it out together. We sincerely cherish our customers, your 100% satisfaction is very important to us!

We Have Many Products In Stock