Precise 9.5mm Plastic-Coated Metal Shaft Potentiometer Single Unit
Electrical specifications:
Items | Specification |
End resistance | 50Ω max. |
Ratings power | 0.05W |
Maximum operating voltage | B Taper :10V AC or 50V AC,Other taper : 5V DC or 25V AC |
Insulation resistance | 100MΩ min. at DC 250V |
Dielectric strength | 1 minute at 300V AC |
Slider noise | 100mV max (before reflow and cycle test) |
Output signal | Refer to attached drawing |
Mechanical Characteristics:
Items | Specification |
Rotational torque(gf.cm) | 50~250gf.cm at 20℃ 500gf.cm max. at -30℃ |
Push-pull strength | 10Kgf min |
Total rotational angle | 300° |
Stopper strength | 3Kgf.cm min |
Durability:
Items | Specification |
Rotational life | Permissible resistance change after 15,000±200 cycles on 600 r.p.h .without load ±15% max. |
Operating temperature | -40℃~85℃ |
Dimension: