Description:

- 10 Port CTO/NAP/FAT Box is used for Hua/wei FastConnect solution.

- It is a product with all inlet and outlet cables pre-connected, eliminating the need of closure opening and fiber splicing.

- All ports are equipped with hardened adapters.

- The operators do not need to splice fibers or open boxes during ODN deployment, which improves service provisioning efficiency and reduces the total cost of operation (TCO) by 15–30%.

- KCO-FTTA-10B outdoor water-proof fiber optic splitter terminal access box is able to hold up to 10 subscribers.

- It is used as a termination point for 1 x ISP cable to connect with 1 x OSP cable and 8 x drop cable in FTTx network system.

- It integrates fiber splicing, splitting, storage and cable management in one solid protection box.

- It can connect the drop cable with feeder cable as the FDB 10port fiber optic distribution box in the FTTx network, which is cable to meet at least 10 users requirements. fiber distribution box can help fiber cable splicing, splitting, storage, and termination management with suitable space in a solid protection enclosure box.

- Most importantly, fiber optic distribution box has good waterproof performance, reaches Protection level IP68, acted as an FDP fiber optical 6core terminal point for fiber home access.

Features
- The body is made of high quality engineering plastic with good strength;
- With good water-proof performance, suitable for indoor and outdoor natural environments;
- With water-proof adapter, the box can be operated more conveniently;

- The drop leaf can be installed 2 pcs of 1*4 & 1 pcs of 1*8 & 1 pcs of 1*9 tube splitter.

Application:

- Passive fiber optic system

- FTTx (FTTA, FTTB, FTTO, FTTH, ...)

- Telecom Tower

- CATV system

- WAN, LAN, ...

Technical data:

- Environmental requirement

Working temperature: -40℃~+85℃

Relative humidity: ≤85% (+30℃)

Atmospheric pressure: 70KPa~106Kpa

- Main technical datasheet Insertion loss: ≤0.15dB

UPC return loss: ≥50dB

APC return loss: ≥60dB

- Thunder-proof technical datasheet

The insulation resistance between the grounding device and the metal parts of the box is no less than 2´104MΩ/500V (DC); IR≥2, 104MΩ/500V.

The voltage resistance between the grounding device, and the box and its metal parts is no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V

- Photoelectric performance
Connector attenuation (insertion, interchange, repetition) ≤0.3dB.
Return loss: APC ≥60dB, UPC ≥50dB, PC ≥40dB,
- Main mechanical properties parameters
Connector insertion and removal durability life > 1000 times

Specification: