MachineU > China Products > Security & Protection > Access Control Systems & Products > Access Control Card Reader
Impinj R2000 Long Range UHF Rfid Reader , Rfid Tag Reader For Warehouse Management
Impinj R2000 Long Range UHF Rfid Reader , Rfid Tag Reader For Warehouse Management
Specifications
Brand Name :
sunshine
Model Number :
F5860
Certification :
CE,ROSH
Place of Origin :
CHINA
MOQ :
1
Payment Terms :
T/T, Western Union
Packaging Details :
Carton
Tag Protocol :
EPCglobal UHF Class 1 Gen 2/ISO 18000-6C
Working Frequency :
840～960MHz
Communication Interface :
USB、RS232、RS485、Ethernet
Antenna interface :
Four TNC
Reader Chip :
R2000
Dimension :
26.5*25.0*4.5CM(including bracket)
Maximum operating current :
1A
Receiving :
-82dBm
Description

Impinj R2000 Long Range UHF Rfid Reader , Rfid Tag Reader For Warehouse Management

Product Advantage

1. Employed IMPINJ R2000 RF Chips, up to -82dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment.
2. Remarkable performance, can achieve a reading distance over 8m for single tag reading with 8dbi RF antenna.
3. Remarkable performance in intensive taps reading, can attain a tags identification rate of 400tags/s.
4. Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
5. Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.
6. The use of carrier wave cancellation technology makes the tags reading more accurate and reading scope wider.
7. Provide four TNC antennae interfaces, users can achieve superior reading performance with less equipment deployment.
8. Enhanced noise suppression function for reliable data capturing.
9. High precision return signal strength (RSSI).

Technical parameters

Name Parameters Remark
Reader Chip R2000
Tag Protocol EPCglobal UHF Class 1 Gen 2/ISO 18000-6C
Working Frequency 840～960MHz
Supporting Working Area China, Europe, the United States, South Korea, Japan, Taiwan……
Operating Voltage 12V DC power supply
Maximum operating current 1A Test of transmit power in 30dBm state
Standby current ≤80mA
RF port maximum output power 1W(30dBm)
Working Temperature -25℃～+65℃
Working Humidity ≤95%(+25℃)
Storage Temperature -40℃～+80℃
Receiving -82dBm
Antenna interface impedance 50Ω
Serial communication parameters Baud rate adjustable(default 115200bps),parity bit:0 ,data bit:8 ,stop bit:1
Power output settings 5～30dBm adjustable /Adjustable minimum interval of 1dBm(default 30dBm)
DRM mode support
RSSI support
High temperature automatic protection function support
Power supply enable support
GPIO interface

3-Road GPIO can only input can not be input,GPIO port default is low, the output high level of 5V,GPIO 3 IS USDED TO CONTROL LED state indicator(green) and buzzer
buzzer support
LED lights

Power indicator: Red
Status indicator: Green
Communication Interface USB,RS232,RS485,Ethernet Only one of the communication interfaces on the F5860-H can be used alone. Do not communicate with each other at the same time.
Antenna interface Four TNC The F5860-H working antenna defaults to antenna 1.Antenna parameters can be configured: working antenna, working time, interval time.
dimension 26.5*25.0*4.5CM(including bracket)
Accessories

12V/3A Power Adapter:1
Serial line: 1 root


PIN Green Terminal Interface Definition

Pin NO. Name Description Remark
1 485-B RS485 B
2 485-A RS485 A
3 EN_OUT Equipment enable control interface,When the high level input, the device will be in a state of sleep.The high level voltage is 5V.
4 GPIO1 GPIO port output, can be programmed to control the level of output.The output high level is 5V, the low level is 0V.The maximum output current is 100mA. (The default output level is low level 0V)
5 GPIO2 the same as above
6 GPIO3 the same as above(note:Equipment has occupied this interface for the green LED lights and buzzer control)
7 NC Reserved interface, no function
8 NC Reserved interface, no function
9 WIFI_RESET Device WIFI configuration parameter reset pin,this pin and the GND pin short to 10 seconds to restore the factory settings WIFI.
10 GND Signal reference.



Impinj R2000 Long Range UHF Rfid Reader , Rfid Tag Reader For Warehouse Management
Impinj R2000 Long Range UHF Rfid Reader , Rfid Tag Reader For Warehouse Management

Service:

1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.

Product tags

uhf rfid reader karachi

,

long range rfid reader module

,

industrial uhf rfid readers
Send your message to this supplier
Send Now

Impinj R2000 Long Range UHF Rfid Reader , Rfid Tag Reader For Warehouse Management

Ask Latest Price
Product Detail
Brand Name :
sunshine
Model Number :
F5860
Certification :
CE,ROSH
Place of Origin :
CHINA
MOQ :
1
Payment Terms :
T/T, Western Union
Contact Supplier
Impinj R2000 Long Range UHF Rfid Reader , Rfid Tag Reader For Warehouse Management

SUNSHINE RFID Technology Co.,Limited

Active Member
8 Years
guangdong, shenzhen
Since 2011
Business Type :
Manufacturer
Main Products :
UHF RFID Reader, UHF RFID Module, Passive RFID Reader
Total Annual :
1000000-3000000
Employee Number :
100~200
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products 4 Port RFID Reader
MachineU China Products Security & Protection Access Control Systems & Products Access Control Card Reader
Contact Supplier
Submit Requirement