R2000 One port RFID Module development board with ISO 18000-6C for parking system
Advantages
Product Electrical Parameters
NO. | Name | Parameters |
1 | Working Voltage | DC 3.7~5V |
2 | Working Current | 1.5A |
3 | Standby Current | ≤50mA |
4 | Sleep Current | ≤1mA |
5 | Working Temperature | -25~+65℃ |
6 | Working Humidity | ≤95%(+25℃) |
7 | Storage Temperature | -40~+80℃ |
8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
9 | Working Frequency | 840~960 MHz |
10 | Supporting Working | China 1,China 2 |
11 | RF IC | Impinj R2000 |
12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
13 | Output Power Flatness | ±0.2dBm |
14 | Receiving Sensitivity | -82dBm |
15 | RF Port Standing | ≤1.5 |
16 | Reading Distance | ≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
17 | Multi-tag Reading | ≥400 tags/s |
18 | Antenna Interface | one(MMCX) |
19 | Interface Communication Rate | 115200bps |
20 | Working Temprature Detection | support |
21 | Intensive Read/Write | support |
22 | Antenna Connection | support |
23 | RSSI | support |
24 | LED | Red light (power indicator ) |
25 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
26 | Dimension | 56.5*36.0*7.8 MM |
Interface Definition
Pin NO. | Name | Type | Description |
1 | UART_TX | I/O | TTL UART Transmit |
2 | UART_RX | I/O | TTL UART Receive |
3 | GPIO3 | I/O | Output |
4 | GPIO2 | I/O | Output |
5 | GPIO1 | I/O | Output |
6 | PWREN_MODULE | I/O | When Pull Down This Pin to Ground,The Module Enter Sleeping Mode. |
7 | GND | Ground | Ground |
8 | |||
9 | VCC | Power | DC 3.7V to 5V Power Input. |
10 |
Remark:
The M2210 module developed a corresponding development board kit, coupled with the rapid technology of ultra-high frequency demonstration software DEMO, customers can easily and quickly familiar with the use of M2210 module, and related hardware and software development, shorten the development cycle.
The M2210 development board has a wealth of peripheral interfaces: RS-232, RS485, USB, network interface, wireless WIFI, Wiegand. Customers can choose according to the actual use of the situation.
Development board kit includes: M2210 + development board 1 set, 12V power adapter 1, 1 interface cable. Development board size: 22.0 × 12.0 × 3.5CM.
Note: Development board related configuration to be purchased separately.