Metrax Primedic Rechargeable Li-Ion Battery (LiFePO4) For Defimonitor XDxe (M290) Series UN3480 99135 97311

Rechargeable lithium-ion battery (LiFePO4), battery with charging indicator and external charging contacts. Energy content 33 Wh, nominal operating voltage 13.2 VDC, nominal capacity 2.5 Ah. Shelf life of up to 4 years from date of manufacture.

It can be charged through the DefiMonitor XD line of products, charging cradle and clip chargers.

All specifications apply to a new, fully charged AkuPak LITE / AkuPak XD at a temperature of 20 °C ± 5 °C or less: AkuPak LITE / AkuPak XD connected to the device, the device only in standby mode and not in operation, only at intervals recommended by Metrax Perform routine self-tests. The ambient temperature is always kept at 23 degrees Celsius (± 2 degrees Celsius), so if the device is stored in outdoor temperatures, its lifespan will be significantly reduced. Metrax is not responsible for the durability of the AkuPak LITE / AkuPak XD, since various parameters can affect the durability of the AkuPak LITE / AkuPak XD.

Specification

Inserting The Power Module

Put the device on your back.

Push the (new) power module (2) in the direction of the arrow (1.) on the device until it is at the back (3) as shown.

Then push the front of the feed module into the bay (1) in the direction of the arrow (2.) until the feed module release button tabs (4) snap firmly into place.

Push the power module all the way into the device until you hear a "click" to lock the power module evenly out of the device. If the power module falls off when moving the device, it is not properly locked.

If the power module is seated correctly, the device powers on and performs an automatic self-test. Follow the audio/visual instructions on the device, then turn off the device.

Look at the progress bar. When the screen shows "OK", the device is ready to use

Press the power button to turn off the device (if necessary).

The screen does not show "OK"? An error message appears on the monitor, eliminate the cause or call the nearest service center. The device turns off.

Removing The Power Module From The Device

The power module should only be replaced when the device is turned off and the defibrillation pad connections have been removed.

Place the device on your back and press the release button (1) in the direction of the arrow (1.) until the tabs on the power module (2) release and part of the power module (3) protrudes from the compartment (4). ). Slightly turn the power module in the direction of the arrow (2.) and pull it out of the device in the direction of the arrow (3.).

If you're interested in Metrax Primedic Rechargeable Li-Ion Battery (LiFePO4) For Defimonitor XDxe (M290) Series UN3480 99135 97311 ,feel free to contact us .Thank you .