Mindray T1 IPM12 IPM10 IPM8 Imec8 Imec10 Imec12 Patient Monitor Spo2 Board 051-000943-00

About Spo2

The multi-parameter module supports the independently developed Mindray SpO2 board which provides SpO2 measurement as good as other boards but with smaller size and lower consumption. It is also compatible with Nellcor NELL-1 SpO2 board and Masima MS-2013 SpO2 Board

SpO2 board is used to collect SpO2 signals transmitted by the multi-parameter module and process SpO2 algorithms

Specification

SpO2 Test

Follow this procedure to perform the test:

1. Connect the SpO2 sensor to the SpO2 connector on the monitor. Set [Cat. Patient] to [Adu] and [PR Source] to [SpO2] on the monitor.

2. Measure SpO2 on the finger. (assuming you're okay)

Check the PR and Pleth waveform readings on the screen and confirm that the displayed SpO2 value is between 95% and 100%.

3. Remove the SpO2 sensor from the finger and ensure that the SpO2 sensor off alarm is enabled.

Note

A trigger tester cannot be used to assess the accuracy of a pulse oximeter monitor. However, it can be used to demonstrate that a particular pulse oximeter monitor will reproduce a calibration curve that has been independently proven to meet certain accuracy specifications.

Removing the SpO Board

Unscrew the two M3×6 screws indicated below and take out the SpO2 board

RFQ

1. How can i place order ?

Contact our customer service firstly ,then we will help confirm all the details and send back proforma invoice to confirm .Order will be shipped out in 2-3 working days after receiving full payment .

2.How long is your warranty

Our warranty is 90 days .If you have any after-sales problems ,feel free to contact us .

3.When can i receive my order ?

Usually it will take around 3-5 working days to prepare for the order ,and around 5 working days to arrive on your side .Usually ship by DHL ,Fedex or UPS

4.What’s your payment terms ?

We need to receive full payment before the shipment .Payment could accept T/T ,paypal ,western union

If you're interested in Mindray T1 IPM12 IPM10 IPM8 Imec8 Imec10 Imec12 Patient Monitor Spo2 Board 051-000943-00,feel free to contact us .Thank you .