MachineU > China Products > Consumer Electronic > Computer Hardware & Software > Routers
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
Specifications
Brand Name :
GE IP Adapter cable
Model Number :
TS-F1-H2005772-001
MOQ :
1
Payment Terms :
T/T, Western Union，PayPal
Delivery Time :
3-5 working days
Product name :
GE IP Adapter cable
Type :
2005772-001
Application :
Patient Monitor
Warranty :
90days
Patient Type :
Adult
Lead Cable Length :
30 cm
AC Input Voltage Rate :
110V—240v
Product State :
Run Well
Power supply source :
Electric
Operation policy :
Quality first, efficiency first, reputation first, service first
Inventory Situation :
Sufficient inventory
Transport means :
Express delivery
Description

GE Invasive Pressure IP Adapter cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001

► Brief Introduction

The dual invasive blood pressure adapter is intended to be used for connection two invasive blood pressure transducers to GE Medical System Information.

Work for GE B20 B20i B40 B105 B125 Modules. Cath-Lab, MAC-Lab, Dash 1000, Dash 2000, Dash 3000, Dash 3100, Dash 4000, Dash 5000, Eagle, Solar 7000, Solar 8000, Solar 9000, Tram 451, Tram Module 100-600, Tram Rac 3, Tram Rac 4A, Tram Scope 100-800 A, Tram Scope 100-800 L

To measure invasive blood pressure, a catheter is inserted into an artery or vein. The invasive pressure setup, consisting of a connecting tubing, a pressure transducer, an intravenous bag of normal saline, all connected together by stopcocks, is attached to the catheter. The transducer is placed at the same level with the heart, and is electrically zeroed.

The transducer is a piezo-resistive device that converts the pressure signal to a voltage. The monitor interprets the voltage signal so that pressure data and pressure waveforms can be displayed.

►Invasive blood pressure measurement

Configure the simulator’s IBP channels as follows:

Sensitivity: 5 µV/V/mmHg

InvBP outputs: "0 mmHg static pressure" or "atmosphere"

  • Zeroing
  • Press IBP Zero All key.
  • Check that a message "Zeroing" followed by a message "Zeroed" is shown in the IBP parameter window.
  • Static Pressure
  • Configure the simulator's InvBP output to "200 mmHg static pressure".
  • Check that the flat pressure line appears on the related waveform field. The reading in the parameter window shall be 200 ±10 mmHg.

NOTE: Recalibration is required, if the measured value is not within the specification.

  • Pressure Waveforms
  • Configure the simulator's InvBP output to "Arterial 120/80".
  • Check that the pressure waveform for tested invasive pressure channel appears in the IBP waveform field and the Sys/Dia (Mean) pressure values are shown in the related parameter window.

► Invasive blood pressure connectors (IBP1, IBP2)

GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001

1 BP_+VREF BP transducer excitation voltage, channel 1
2 BP SIG+ BP transducer signal positive (+), channel 1
3 BP_+VREF BP transducer excitation voltage, channel 2
4 AGND Analog ground
5 BP SIG+ BP transducer signal positive (+), channel 2
6 SHIELD BP cable shield
7 AGND Analog ground
8 BP SIG1 BP transducer signal negative (-), channel 1
9 BP SIG2 BP transducer signal negative (-), channel 2
10 BP1_ID BP1 probe identification
11 NC Not connected

If you have other inquiry of GE Invasive Pressure IP Adapter cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001, please feel free to contact us.

We are always ready to serve you.

Product tags

ssmp connector

,

dual shock adapter

,

st to sc adapter
Send your message to this supplier
Send Now

GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001

Ask Latest Price
Product Detail
Brand Name :
GE IP Adapter cable
Model Number :
TS-F1-H2005772-001
MOQ :
1
Payment Terms :
T/T, Western Union，PayPal
Delivery Time :
3-5 working days
Product name :
GE IP Adapter cable
Contact Supplier
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001
GE Invasive Pressure IP Adapter Cable IBP Tram 451 Dual Adaptor 0.3 Meter REF 2005772-001

China World Technology Medical Equipment Service Group

Verified Supplier
5 Years
guangdong, guangzhou
Since 2015
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer, Exporter, Trading Company, Seller
Main Products :
Used Patient Monitor, Patient Monitor Parts, Patient Monitor Repair
Employee Number :
20~50
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Patient Monitor Accessories
MachineU China Products Consumer Electronic Computer Hardware & Software Routers
Contact Supplier
Submit Requirement