Biolight SpO2 Extension Cable 12pin PN 15-027-0005 for M series M9500, M900A, M8000A, M8500

►Brief Introduction

The measurement of degree of blood oxygen saturation (also known as pulse oxygen saturation, usually shortened as SpO2) adopts the principles of light spectra and volume tracing. The LED emits lights with two specific bandwidths, which are selectively absorbed by hemoferrum and desoxyhemoglobin. The optical receptor measures the changes in the light intensity after the light passes the capillary network and estimates the ratio of hemoferrum and the total hemoglobin.

When using SpO2 sensor, care should be taken to shield external light sources, such as light of thermo therapy or ultraviolet heating light, otherwise the measurements may be disturbed. Under such conditions as shock, hypothermia, anemia or the use of blood vessel-activating drugs, and with the existence of such substances as carboxyhemoglobin, methemoglobin, methylene blue the result of the SpO2 measurement will be possibly not accurate.

► Connecting to Patient and Monitor

Plug the SpO2 sensor cable into the socket marked with SpO2, then put the sensor onto the finger of the patient.

After the SpO2 sensor is connected to the patient, the screen shall display SpO2 waveforms and then it shall calculate the SpO2 value and pulse rate value.

► Specifications

► Preparatory Steps before the Measurement of SpO2/Pulse

1) Plug the SpO2 sensor cable into the SpO2 socket of the monitor.

2) Put the SpO2 sensor onto the finger of the patient, and the screen should display SpO2 waveforms, and the SpO2 value and pulse rate should be calculated.

3) Set up the parameters relevant to SpO2 and pulse monitoring.

► For More Details

Please kindly note that both new and second-hand medical machine are dispatched with at least 90 days warranty period and they are not allowed to leave our workshops before being completely tested by our engineers who will treat each machine and unit with the most care to ensure they are all 100% efficient equipment. Of course, we are confident to let you satisfy with our products and service. But if you are not, please contact us as soon as you find any problem. Our ultimate goal is to strive to develop and sell the best products to the customers all over the world. Customer's satisfaction is our greatest pursuit.

► Cooperation Tips

Before placing an order, there are some important things to be aware of. In order to promote business development, please read the following content carefully.

First of all, be sure to remember all the images before you buy to make sure that the product you are viewing is the one you are looking for. This is important because images are also important references to product descriptions.

Secondly, the buyer is responsible for all customs charges, including all taxes and duties. Therefore, you must ensure that the machines you order can be imported into your country/region. In short, please don't forget to check all relevant information when placing your order.

Thank you for your time and interest in Biolight SpO2 Extension Cable 12pin PN 15-027-0005 for M series M9500, M900A, M8000A, M8500. Customer satisfaction. Our biggest pursuit!