050-002275-01 Mindary BeneVision N17 Patient Monitor Alarm LED Bulb and Light Board

Alarm LAMP Board

Alarm LAMP Board board is equipped with LED alarm light and light sensor. The light sensor detects the ambient light and adjusts the brightness

of the background light of the LCD.

Alarm Failures

Removing the Alarm Lamp and Light Sensor Board

1. Remove the cable on the alarm lamp and light sensor board.

2. Remove the two PT3×8 screws and take out the alarm lamp and light sensor board

NOTE

• Be careful when disconnecting the cable to avoid damage.
• When installing, align the positioning ribs of the front shell plate, and press the plate towards the direction of the alarm light cover.
• When reinstalling the board, be careful to avoid overtightening the screws and stripping the holes.

Alarm category

The monitor has two different types of alarms: physiological alarms and technical alarms.

■ Physiological alarms are triggered by patient measurements that exceed parameter limits or patient conditions that are abnormal.

■ Technical alarms are triggered by failure of electrical, mechanical or other monitors, or failure of sensors or components. A technical alarm condition may also result when the algorithm is unable to classify or interpret the available data. In addition to physiological and technical alarms, information can be prompted to inform the status of the system or the status of the patient.

Adjusting the Alarm Light Brightness

NOTE:

If you set alarm light brightness to Auto, the monitor automatically adjusts the alarm light brightness according to the ambient light. The stronger

the ambient light is, the brighter the alarm light is.

Thank you so much for your attention .If you're interested in 050-002275-01 Mindary BeneVision N17 Patient Monitor Alarm LED Bulb and Light Board,feel free to contact us .Thank you .