Med-tronic Lifepak LP20E Defibrillator Battery 3205296-004 10.8V 6.6Ah Compatible New
► Brief Introduction
AC power is the main power source for the LIFEPAK 20 defibrillator/monitor. There is one 10 cell nickel metal hydride (NiMH) backup battery located in the bottom case. This battery is not intended to be used as the primary power source. If the primary power source is removed, due to power outage or other reason, the backup battery will power the unit for at least two hours.
The LIFEPAK 20 defibrillator/monitor also has a coin battery that delivers a continuous flow of power to the internal clock and other accessories. This battery has a five-year life span, it is not rechargeable, and it should be replaced at the end of its life.
The LIFEPAK 20 defibrillator/monitor has a built-in high-current charger that recharges a completely discharged backup battery in approximately two hours. Recharging occurs when ac power is connected to the defibrillator. When the battery is completely charged, the charger does not recharge the battery until primary power is lost/restored or two weeks have passed since the batteries last full recharge.
► To remove the A07 Battery:
1. Disconnect the defibrillator from ac power.
2. Place the defibrillator top down.
3. Insert two small flat bladed screwdrivers into the door taps and pinch the tabs to remove the battery door, A in graphic at left.
4. Disconnect and remove the A07 Battery.
► To Install the A07 Battery:
1. Place the defibrillator top down.
2. Connect the W08 Battery Cable to the A07 Battery.
3. Insert the A07 Battery into the battery compartment ensuring that the battery fuse is facing toward the rear of the defibrillator.
Note: Install the A07 Battery in the compartment with the wire harness facing toward the front of the defibrillator.
4. Close the battery door.
► Specification
Energy Select: | 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 70, 100, 125, 150, 175, 200, 225, 250, 275, 300,325, and 360 joules and user configurable sequence of 100–360, 100–360, 100–360 joules |
Charge time: | – Charge time to 200J <5 seconds with fully charged battery – Charge time to 360J <7 seconds with fully charged battery – Charge time to 360J <10 seconds while not in low battery operations |
Synchronized Cardioversion: | – Energy transfer begins within 60 ms of the QRS peak – Energy transfer begins within 25 ms of the External Sync Pulse – External Sync Pulse; 0–5V (TTL Level) Pulse, active High, > 5 ms in duration, no closer than 200 ms apart and no further than 1 second apart |
Thank you for your time and interest in Med-tronic Lifepak LP20E Defibrillator Battery 3205296-004 10.8V 6.6Ah Compatible New. If you want to explore more details please let us know.