PHiliphh MX40 Patient Monitor 5-Lead ECG Spo2 Cable Compatible New DLP-011-05

PHiliphh MX40 Patient Monitor 5-Lead ECG Spo2 Cable Compatible New DLP-011-05 Brief Introduction

PHiliphh MX40 Patient Monitor 5-Lead ECG Spo2 Cable is compatible with PHiliphh MX40 patient monitor ,it can be measured ECG and Spo2 .There are 5 leads .The Spo2 are 8 pins ,it’s D shape .The ECG cable is snap type .

Specification of PHiliphh MX40 Patient Monitor 5-Lead ECG Spo2 Cable Compatible New DLP-011-05

Pulse Oximetry Measurement

MX40 supports SpO2 sensor connection using Fourier Artifact Suppression Technology (FAST). The FAST algorithm overcomes many problems

associated with traditional pulse oximetry, such as: B. sensitivity to patient movement and strong ambient light. This algorithm provides better

motion artifact suppression and performance in patients with hypoperfusion. SpO2 can be measured continuously, with values sent to the

information center every second, or as a single individual manual measurement. After 1 hour, manual measurements will be removed from the

Notification Center display.

The SpO2 parameter measures arterial oxygen saturation, which is the percentage of oxygen-containing hemoglobin compared to the total

hemoglobin. For example, if a total of 97% of the hemoglobin molecules in arterial red blood cells are bound to oxygen, the blood oxygen

saturation will be 97%. The SpO2 value displayed on the monitor is 97%. The SpO2 number indicates the percentage of hemoglobin molecules

that combine with oxygen molecules to form oxyhemoglobin.

Measuring ECG

An electrocardiogram (ECG) measures the electrical activity of the heart and displays it as waveforms and numbers on the MX40 and the

Information Center. To compare the measured ECG signals, electrodes (or patient cables) are placed in standard positions to form "leads."

Different lead sets are used in different configurations to obtain optimized ECG signals for use in diagnosis and patient management in different

medical settings. Standard, hexad, and EASI lead placements are available with the MX40. Heart rate calculations are located in the MX40's

arrhythmia algorithm. Arrhythmia analysis is always active for telemetry patients. Arrhythmia analysis is basic or advanced depending on product

configuration

Thank you so much for your attention .If you're interested in PHiliphh MX40 Patient Monitor 5-Lead ECG Spo2 Cable Compatible New DLP-011-05 ,feel free to contact us .Thank you .