Nihon Kohden Defibrillator TEC-7621C Defibrillator Paddles ND-782VC

Nihon Kohden Defibrillator TEC-7621C Defibrillator Paddles ND-782VC Defibrillator Paddles Parts

Nihon Kohden Defibrillator TEC-7621C Defibrillator Paddles ND-782VC Brief Introduction

This is the original Japanese defibrillator paddles ND-782VC,adapted to the defibrillator TEC-7621C.

Feature

Nihon Kohden TEC-7621C has a large screen and liquid crystal display screen, and it is also a multi-functional machine equipment for defibrillation and monitoring.It is mainly used to monitor the function of ECG and heart rate, display vital signs, alarm limits, use duration, mode, pacemaker, motor times, and become a multi-functional solution for emergencies, with a wide range of applications. Clinics, emergency rooms, families, it is an indispensable part of hospitals all over the world.

Defibrillator Paddles is a high voltage capacitor made up of thousands of independent small capacitors. When part of the high voltage capacitor breaks down, the remaining capacitor can still provide enough electricity for defibrillation, which can effectively prevent the sudden breakdown of the capacitor.

Charging instructions

The position of the charge and discharge button of the defibrillator is on the handle of the defibrillator, that is, on the two electrodes held in the hand. In the actual operation, first set the defibrillator to the desired energy position, hold two electrodes in hand, and press the button on the side of the electrode handle. This process is the process of charging. After the charging is over, the handle of the defibrillator will turn green, and the charging will be displayed on the defibrillator.

Error Code

Removing the Paddles
* Make sure that the power of the instrument is turned off.
* Disconnect the AC power cord from the AC outlet and defibrillator.
* Remove the paddles. (When removing the paddle do not pull anywhere other than the paddle connector. Otherwise, the paddle connector or paddle cable may be damaged.)
* To remove the paddles, press and hold the paddle release knob on the paddle connector and pull the paddle connector toward you.
* Remove the memory card if it is inserted. (Make sure that the card eject button is depressed. Otherwise, the button may be damaged when removing the lower casing and the memory card slot becomes unusable.)