Maquet Control Cable PN 6586932 Work for Maquet Servo-U Ventilator Maquet Servo-i Ventilator System

► Brief Introduction

Maquet Servo-U Ventilator Control Cable 6586932 is a specific part designed for use with the Maquet Servo-U ventilator system. It is used to connect the control panel to the ventilator unit, allowing for communication and control of the ventilator settings.

► How to use

First, ensure that the Maquet Servo-U ventilator is turned off and disconnected from power.

Locate the ventilator control cable (part number 6586932) and identify the connector ends. One end of the cable will connect to the ventilator, while the other end will connect to the external control device.

Connect the end of the cable with the smaller connector to the corresponding port on the ventilator. Make sure the connector is fully inserted and securely attached.

Once the cable is securely connected to both the ventilator and external control device, turn on the ventilator and power it up.

Use the external control device to adjust the settings and parameters of the ventilator as needed. The cable allows for remote control and monitoring of the ventilator functions.

Monitor the ventilator and patient closely while using the control cable to ensure proper functioning and delivery of ventilation.

When finished using the ventilator, disconnect the control cable from both the ventilator and external control device. Store the cable in a safe place for future use.

► Nebulizer function test

Perform a function test prior to first use or at any time to verify proper operation.

1. Visually inspect each part of the system for cracks or damage and replace if any defects are visible.

2. Pour 1-6 ml of sterile water or normal saline (0.9%) into the nebulizer unit.

3. Connect the control cable to the SERVO-i Ventilator System.

4. Start nebulization.

5. Check that the aerosol is visible.

6. Discard any remaining liquid before patient use.

► Quick Details

► Warm Tips

In order to avoid causing unnecessary trouble, please read the following carefully.

Please look through all the pictures with patience before placing orders to confirm the product is exactly you want or not as they are also an important part of the product description. What’s more, it is buyer’s responsibility to pay for all the customs fees including all taxes and duties. So it is of great necessity for you to make certain that the equipment you are ordering can be imported in to your country. Once the package leaves our factory, the shipper is not responsible for any delays any more. So please keep it in mind that be sure to check out all the relevant information before placing your orders.

Customer satisfaction!!

Our biggest pursuit! If you want to explore more details about Maquet Control Cable PN 6586932 Work for Maquet Servo-U Ventilator Maquet Servo-i Ventilator System, please let us know.