Valleylab Force FX FX-8C electrosurgical Generator machine fan 8412L 202 701 879

► About Valleylab Force FX FX-8C electrosurgical Generator machine fan 8412L 202 701 879

The Valleylab Force FX FX-8C electrosurgical generator machine fan is a critical component of the machine, helping to keep it cool during use

and preventing overheating. The fan allows for continuous operation of the machine, ensuring reliable performance and safety during surgical

procedures. It is important to regularly check and maintain the fan to ensure proper function and prevent any potential issues with the

electrosurgical generator machine.

► Remove the fan.

(1) Disconnect the fan control connector from the power/RF board. (2) Remove the four screws and nuts securing the fan to the bottom of the PSU/RF board.

► Install the fan on the new PSU/RF board.

(1) Place the fan on the bottom of the power/RF board and install the four nuts and screws securing it to the board.

(2) Connect the fan control connector to J4 on the Power/RF board.

► Replacing the fan

1.Remove the power supply/RF card and attached heat sinks (observe all warnings and cautions). For more information, see “Replacing the Power Supply/RF Card” later in this section.

2. Disconnect the fan connector from the power supply/RF card.

3. Turn the power supply/RF card over and remove the four screws and nuts securing the fan to the card.

4.Place the new fan on the PSU/RF board and install the four nuts and screws securing it to the board.

5.Connect the fan connector to J4 on the power/RF board.

6. Reinstall the power/RF board and attached heat sinks.

► Specification of Valleylab Force FX FX-8C electrosurgical Generator machine fan 8412L

► About Valleylab Force FX FX-8C electrosurgical Generator machine

The Valleylab Force FX-8C is an isolated output electrosurgical generator that provides the appropriate power for cutting, desiccating, and

fulgurating tissue during bipolar and monopolar surgery

► Photo

Below is the photo of Valleylab Force FX FX-8C electrosurgical Generator machine fan 8412L ,for more details ,feel free to contact us .

Thank you so much for your attention .If you're interested in Valleylab Force FX FX-8C Electrosurgical Generator Machine Fan 8412L 202 701 879,feel free to contact us .Thank you .