Brief introduction of GE Vivid E9 ultrasound phased array probe transducer M5S-D

The M5S-D transducer helps you achieve exceptional results in every inspection. This transducer is specifically designed for cardiac, pediatric, abdominal, fetal, transcranial, coronary, pressure, and LVO imaging applications. It has a monocrystalline Phased Array sensor that captures the reflected waves from the positions of the organs and sends them back to the computer. The computer then converts the reflected waves (signals) into images. Each part of the sensor assembly is manufactured with high precision technology, which helps to achieve excellent surface finish and good product composition. This sensor captures stunning images, helping to maximize penetration resolution without compromising. Designed with patient and operator comfort in mind, it helps reduce stress without compromising diagnostic performance. The innovative technology guarantees deep penetration and excellent resolution without the need to change sensors during inspections. It also offers excellent imaging capabilities and ergonomic benefits. M5S-D sensor is compatible with Vivid E9 series, Vivid E9 XDClear, LOGIQ E9 XDClear, LOGIQ E9 XDClear 2.0 and LOGIQ S8

Features :

l Comfort scan design

l Ease of use

l Ergonomic benefits

l Patient and user comfort

l High precision in dimensional measurement

l Compact design

l Can be used for Cardiac, Pediatric, Abdomen, Fetal Heart

l Matrix single crystal phased array probe

Transducer cautions

The use of the phased ultrasound transducer requires caution and careful handling. Here are some precautions to consider:

• Avoid dropping or mishandling the sensor, as this may damage the internal components and affect its performance.
• Before performing any test, always check that the transducer is properly connected to the ultrasound system.
• Clean the sensor after each use according to the manufacturer's instructions. Use approved wipes or disinfectants to prevent the spread of infection.
• Do not use solvents or strong cleaning agents, as they may damage the surface of the sensor or compromise its sterilization.
• When not in use, store the sensor in a safe, dry location away from extremes of temperature and moisture.
• Periodically inspect the sensor for damage such as cracks or loose parts. If you notice any problems, stop using it and contact the manufacturer for repair or replacement.
• Follow proper patient positioning protocols during ultrasound examinations to ensure accurate and safe images.
• Before scanning, apply an adequate amount of ultrasound gel to ensure good acoustic contact between the transducer and the patient's skin.
• Avoid bending or twisting the sensor cable as this may cause internal damage. Instead, carefully twist the cord when not in use.
• Always follow the manufacturer's instructions and obtain the necessary training on the proper use of the ultrasound system and transducer.

Thank you so much for your attention .If you're interested in ,feel free to contact us .Thank you .