Aloka ASU-1009 3D4D Ultrasound Transducer Probe 3.5mz Used

►Quick Detail:

This product is an Aloka ASU-1009 ultrasound probe, which is in good second-hand condition
The frequency range of Aloka ASU-1009 3D/4D curved array transducer is 2.0 MHz and 10.0 MHz.
Can support the following applications: obstetrics, gynecology, and abdomen.

At the same time, the probe is compatible with: Aloka SSD-3500；
Aloka SSD-4000；
Aloka ProSound Alpha 5 Ultrasonic System.

Dimensions: 3D/4D curved array
Application: Obstetrics, Gynecology, Abdominal
Frequency range: 2.0-10.0 MHz.

► Cleaning and disinfection steps for the cables and connectors of the probe:

Acoustic head: It can convert electrical signals into sound waves and also convert received echoes into electrical signals. The lens on the surface of the probe is the acoustic lens.

Probe cable: Transmits electrical signals between the probe head and the connector.

Probe connector: Connect the probe to the ultrasound system.

Cleaning and disinfection steps for the cables and connectors of the probe:

1. Remove the probe from the host;
2. Adjust the direction of the probe and connector, placing them with their contact surfaces facing upwards;
3. Use a soft cloth moistened with warm soap solution or disinfectant to clean the cables and connectors. The soft bristled brush can only be used to wash the metal surface of the connector. Do not allow liquid to enter the probe and the device through the probe tail cover or the area around the connector tail cover.
4. Prepare disinfectant;
5. Wipe or spray cables and connectors with disinfectant. For wiping time, solution concentration, and contact time between disinfectant and cables, please follow the instructions on the disinfectant label to ensure that the disinfectant concentration and contact time are suitable for the specific clinical use of the device, and disinfectant should not enter the device, connector, or contact connector label;
6. According to the instructions on the disinfectant label, use air drying or wipe dry with a disinfected soft cloth;
7. Check the appearance of the probe cable for any damage (cracking, breakage, liquid ingress, etc.), please stop using.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex, We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.