GE Datex Ohmeda M-REC Recorder Printer Module 898847-00 ​

►Quick Detail:

This module is used in conjunction with GE/Datex Ohmeda AS/3, AS/3 Compact, or GE Datex Ohmeda S/5 Monitor or S/5 Compact Monitor.

This module uses a gas concentration waveform with a data rate of 25Hz to calculate the end tidal (ET) gas
This module identifies the moment when the concentration of carbon dioxide is highest in each breath.
If a breathing pause is detected within a given time (e.g. 20 seconds), a breathing pause condition is triggered. During apnea, ET updates the value to the current concentration of each gas every two seconds.

The test gas is sent into the module through an electric valve with a very small internal volume. Depends on its actions
In the state, the valve guides indoor air or test gas to the gas sampling pipeline. Expected respiration

using a 3-meter-long gas sampling line
Length, connected to the gas sampling port on the D-fend Pro dehydrator. Gas sampled
Use an electric valve with low internal pressure to switch the pipeline from indoor air to test gas
Dead zone, to generate a step change in gas concentration. Electric start signal of valve
Generate high-precision signal generator for precise control of simulated respiration
Rate. The electronic sampling rate of the gas sensor signal is 25Hz, which is equivalent to a new data point on the gas
The waveform is tracked every 40 milliseconds.

Warning: Disconnect the module from any monitoring system before performing any operation
repair.
Warning: It is essential to conduct a gas sampling system leak test after opening the module cover
Reassemble.
Warning: Always perform gas calibration after any planned or corrective actions
maintain.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex,etc.We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.